Not Enough Room For A CMC? No longer an Issue.
-
- Posts: 6
- Joined: Sun 10 Jan, 2016 11:30 pm
- Location: Essex
- Organisation: TGS Repairs LLP
- Interests: Football, Fishing, Computers, Framing (Of Course)
- Location: Essex
- Contact:
Not Enough Room For A CMC? No longer an Issue.
Space is no longer an Issue!!
Our latest Valiani installation was in a small gallery who in the past would have been told they do not have the space for a CMC machine of any description.
Thanks to the new wall mounting kit designed by Valiani it is now possible for them to enjoy all of the features and speed that a new CMC machine has to offer.
The pictures below show the final installation of both the Valiani machine pulled forward in an operational position which is quite imposing on the space and also the machine when it is stored against the wall when not in use.
Now is the time to reconsider your space as it might now be possible.
Installation completed by Mark Griffiths and Jamie Griffiths
Our latest Valiani installation was in a small gallery who in the past would have been told they do not have the space for a CMC machine of any description.
Thanks to the new wall mounting kit designed by Valiani it is now possible for them to enjoy all of the features and speed that a new CMC machine has to offer.
The pictures below show the final installation of both the Valiani machine pulled forward in an operational position which is quite imposing on the space and also the machine when it is stored against the wall when not in use.
Now is the time to reconsider your space as it might now be possible.
Installation completed by Mark Griffiths and Jamie Griffiths
- Attachments
-
- 1461897_10153665737358375_675345744_n.jpg (81.17 KiB) Viewed 17558 times
-
- Space taken up when in use
- 12834908_10153665738438375_1679306130_n.jpg (95.17 KiB) Viewed 17558 times
-
- Valiani CMC Machine in operational position
- 12825125_10153665739113375_90406743_n.jpg (75.49 KiB) Viewed 17558 times
Jamie Griffiths
Engineer
TGS Repairs LLP
Engineer
TGS Repairs LLP
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: Not Enough Room For A CMC? No longer an Issue.
Very neat, looks good
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
- GeoSpectrum
- Posts: 2151
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: Not Enough Room For A CMC? No longer an Issue.
No wall space either!
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
-
- Posts: 6
- Joined: Sun 10 Jan, 2016 11:30 pm
- Location: Essex
- Organisation: TGS Repairs LLP
- Interests: Football, Fishing, Computers, Framing (Of Course)
- Location: Essex
- Contact:
Re: Not Enough Room For A CMC? No longer an Issue.
Hahaha, maybe we will have to start looking for a ceiling mounting kit then.
And thanks Steve, we are very happy with it.
And thanks Steve, we are very happy with it.
Jamie Griffiths
Engineer
TGS Repairs LLP
Engineer
TGS Repairs LLP
Re: Not Enough Room For A CMC? No longer an Issue.
I can sell you some sky hooks I'd you want, might have a long stand as well somewhere
- GeoSpectrum
- Posts: 2151
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: Not Enough Room For A CMC? No longer an Issue.
I bought some mount waits from Lion. very handy.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Re: Not Enough Room For A CMC? No longer an Issue.
Hi
Looks Good I could certainly do with this, just a few questions though
What is the minimum ceiling height and width and length required for an Ultra BC? with this bracket
I'm thinking of getting a new machine would this an option or an extra? as the base wont be required.
And if an extra what's the cost (including the bracket) on top of the standard installation cost?
Thanks Keith
Looks Good I could certainly do with this, just a few questions though
What is the minimum ceiling height and width and length required for an Ultra BC? with this bracket
I'm thinking of getting a new machine would this an option or an extra? as the base wont be required.
And if an extra what's the cost (including the bracket) on top of the standard installation cost?
Thanks Keith
-
- Posts: 622
- Joined: Tue 04 Mar, 2008 11:05 pm
- Location: Brixworth
- Organisation: Retired Picture Framerand Printer
- Interests: mountain biking & drinking beer.... not necessarily in that order!
- Location: Northampton
Re: Not Enough Room For A CMC? No longer an Issue.
That is great... wonder why it's not been thought of before.
Is it a Valiani gizmo or can any CMC utilise the 'kit'
Is it a Valiani gizmo or can any CMC utilise the 'kit'
Canvas, Acrylic, Photographic, Fine Art Printing & Framing
http://www.prophotosolutions.co.uk
http://www.prophotosolutions.co.uk
-
- Posts: 6
- Joined: Sun 10 Jan, 2016 11:30 pm
- Location: Essex
- Organisation: TGS Repairs LLP
- Interests: Football, Fishing, Computers, Framing (Of Course)
- Location: Essex
- Contact:
Re: Not Enough Room For A CMC? No longer an Issue.
Im not 100% sure on the dimensions of the bracket but if you contact Joe at Simons he will be able to give you the exact dimensions. The stand for both the 120 and 150 BC are the same but if clearance above and below is an issue then the smaller will be more suitable as it hangs off the stand less. Also I believe that the wall mounting kit can replace the stand as like you say there is no need for both.
Chris this stand is made by Valiani so is specific to the, I am unaware of anyone else doing the same thing
Chris this stand is made by Valiani so is specific to the, I am unaware of anyone else doing the same thing
Jamie Griffiths
Engineer
TGS Repairs LLP
Engineer
TGS Repairs LLP
-
- Posts: 1
- Joined: Wed 25 May, 2016 4:55 pm
- Location: Mukilteo, WA USA
- Organisation: Wizard International, Inc.
- Interests: www.wizardint.com
Re: Not Enough Room For A CMC? No longer an Issue.
Hi all! Wizard debuted the Space-Saver™ Retractable Wall Mount at the 2015 West Coast Art & Frame Expo in Las Vegas, NV.
Feel free to watch a video demo here: https://www.youtube.com/watch?v=k4ZH8X5Ngmk
For additional details, please visit our website or contact Framers Corner for UK sales:
Telephone: 01530 516 925
Email: info@framerscorner.co.uk
Thank you!
Wizard International, Inc.
http://www.wizardint.com
888.855.3335 (USA)
Feel free to watch a video demo here: https://www.youtube.com/watch?v=k4ZH8X5Ngmk
For additional details, please visit our website or contact Framers Corner for UK sales:
Telephone: 01530 516 925
Email: info@framerscorner.co.uk
Thank you!
Wizard International, Inc.
http://www.wizardint.com
888.855.3335 (USA)
- Attachments
-
- ProductSheet_Space-Saver_Email.pdf
- Wizard Space-Saver™ Retractable Wall Mount
- (1013.51 KiB) Downloaded 551 times
-
- Posts: 36
- Joined: Mon 10 Aug, 2009 7:55 am
- Location: surbiton surrey
- Organisation: picture framers
- Interests: art
Re: Not Enough Room For A CMC? No longer an Issue.
the magic that team Griffis produce!!! shame the hammers don't follow!! lol
Dug
Artefact
Dug
Artefact
-
- Posts: 222
- Joined: Thu 16 Jun, 2011 11:43 am
- Location: Hollingbourne, Maidstone
- Organisation: The Village Framer
- Interests: Photography, Mountainbiking
Re: Not Enough Room For A CMC? No longer an Issue.
I have my Gunnar wall mounted and it works fine.