Workshop Equipment For Sale - Everything Needed for Start Up

[Smiffy]

We are closing our business down in August, and as such have a full professional workshops load of equipment for sale. We are a high street bespoke framers so although everything has had regular use, nothing has been used in a volume framing set up. All are in excellent working condition.

We would prefer to sell to someone who is just setting up, particularly the main 4 pieces of equipment (CMC, underpinner, morso and glass cutter). Its a great opportunity to get everything in one swoop!

The main items are as follows:

Gunnar F1 Hybrid CMC - From new 6 years old - never missed a beat
Morso F (plus left arm, waste chute and 4 sets of blades)
Alfamaccine Minigraf 4 (3 position) (plus wings, stand, double head clamp (lion code 9507), single head clamp, 5, 7, 10, 12 & 15mm wedge heads, foot pedal and various V Nails)
Keencut Excalibur 5000 (plus plenty of spares)
Bambi BB24V 50lpm silent compressor
2x Lion mountboard storage carts on wheels
Glass holder - we stand our normal 4x3 sheets of float on here, with our boxes of AR70 next to it, both fit perfectly
Large wooden workbench - 10'x5.5' (the large plan chest fits underneath)
Racking workbench -154x192cm - this could be reconfigured as its collapsible
Large Plan chest (internal 120x89cm, external (w)135x(d)95.5x(h)71cm)
Plan chest (internal 87x62cm, external (w)99x(d)70x(h)83cm)
L Shape shabby / rustic topped counter - overall area size 149(w)x203cm
I-Bar heat sealer / shrink wrapper
All the small items: tab guns, staplers etc
There may be a selection of mouldings, glass etc
Manneqins - 2 male, 1 female
Some office furniture
2x desk top card racks
Various other items such as microwave, small fridge etc
Some IKEA display shelving (mainly the MALM range)
IKEA glass cabinet

Everything is still being used currently, but will be starting to pack up at the end of July / Beginning of August.

We need the items to be out of the way asap, ideally being collected between 9 Aug - 16 Aug

Everything is located in our shop in Bolsover (S44), and is easily accessible with a van - unfortunately we are unable to deliver.

Drop me a PM if anything is of interest.

Thank you!

[Justintime]

Hi Smiffy,
If you decide to split, I'd be interested in a price for the underpinner and compressor and compressor related tools.
thanks
Justin

[Smiffy]

Hi Justin,

Sent you a PM.

Cheers!

Hi Smiffy,
If you decide to split, I'd be interested in a price for the underpinner and compressor and compressor related tools.
thanks
Justin

[cleaver]

All the best with whatever comes next in life, Smiffy.

[Smiffy]

All the best with whatever comes next in life, Smiffy.

Thank you!

[Smiffy]

Here are images of the four main items. All very well maintained, clean, and fully working.

[theprint.ninja]

would be interested in the underpinned if you were looking at splitting

[joshm21195]

Hi, we're setting up starting on 1st September so the timing would be ideal! Would be interested in the underpinner, excalibur, bambi, tab/staple guns etc for sure. Any chance you could PM some prices if you'd be up for splitting? Good luck in whatever is on the horizon! Thanks. Josh

[Hookie]

Hi Smiffy,

I am currently setting up a framing business and would be interested in a few of the items. Could you send me some prices?

Thanks
Andy
andyhook@mac.com
07517431823

[Ifonly]

Interested on all items in box with price please

[Ade704]

Again, if you are happy splitting it up, I would be interested in the Gunnar. Can you let me know a price please?

Cheers, Adrian
Framing Incredible Ltd
07976 245339
01253 403020

[Mike Polson]

Hi Adrian,

I might be interested in the minigraf and the Bambi, what are you asking?

Cheers

Mike

[Smiffy]

Evening all.

Successfully, the vast majority of items have sold.

We currently have left: the large workbench, both plan chests, morso (incl 1x set of blades, waste chute, left arm & peddle stop bolt). We also have a fair few lengths of moulding (not hundreds of metres) but enough for someone to make good use of.

If anyone is interested in what’s left, let me know before the eBay option becomes necessary.

Cheers!

[dsnape]

If you decide to split i would be very interested in the cmc i am only down the road at the clock tower in Hollingwood

[Smiffy]

Hi,

Sorry, the CMC was one of the first things to go.

Thanks!

[lurcher]

Pm sent

[WillWebster]

Hi there - are the plan chests still for sale?

[AutomotiveMike]

Hi

Do you have any of the framing equipment left?
I am setting up and would be interested but only just joined on here so know it may be too late.

Anyway let me know if/whats left.

Thanks

Mike

[cygnus framing]

Hi - i'm just setting up my own place and was wondering if you would ship the morso if you still had it?

Andy

[Gary2212]

Hi anybody interested in this it’s my late father in-laws think they retail about £1400 I’m selling it for £600 well maintained used for hobby a handful of times free local delivery.
07989 201249