Hi all
I've got an issue with a Wizard 9000
It has started cutting out mid cut on the final outer edge cut
Pressure seems fine and I have tried increasing it slightly
Any ideas would be greatly appreciated
Wizard issu
-
- Posts: 618
- Joined: Tue 23 Jul, 2013 8:56 am
- Location: Bradford
- Organisation: Kwik Picture Framing
- Interests: Picture framing
Making just that little bit of difference to someone, somewhere. - Location: West Yorkshire
Re: Wizard issu
fauly cable from the CPU to head. wear and tear. I had to change mine, now okay.
-
- Posts: 347
- Joined: Fri 26 Apr, 2013 2:48 pm
- Location: mid wales
- Organisation: kingswood frames and mirors
- Interests: framing and framing history manufacture of mouldings and decorated frames
Re: Wizard issu
Thanks for replying.much appreciated
We'll give it a go
We'll give it a go
-
- Posts: 105
- Joined: Wed 03 May, 2017 1:03 pm
- Location: Shrewsbury
- Organisation: Callaghan Framing Ltd
- Interests: Bespoke Framer, Wizard of Europe , Art installers , Moulding Manufactoring
Re: Wizard issu
Tim , let me know any help you need. Check your large grey cable from Ecu to gantry. Wires on the older gen pull out and contact is sketchy. Give me a call few other things to try cheers Ross
-
- Posts: 347
- Joined: Fri 26 Apr, 2013 2:48 pm
- Location: mid wales
- Organisation: kingswood frames and mirors
- Interests: framing and framing history manufacture of mouldings and decorated frames
Re: Wizard issu
Cheers Ross thanks for the offer
All the best
All the best