Just want to say thanks to everyone who contacted me one way or another to give help with this problem.
I now look as though I have this problem resolved.
So thanks to all.
Ric
Search found 35 matches
- Tue 22 Jan, 2013 6:54 pm
- Forum: Help!
- Topic: Colourmount Board
- Replies: 3
- Views: 1627
- Sun 20 Jan, 2013 5:20 pm
- Forum: Help!
- Topic: Colourmount Board
- Replies: 3
- Views: 1627
Re: Colourmount Board
Cheers John, that was the first thing I did, but sadly no Mink.
Hopefully the customer is going to go for the magnolia or CP12 as it was.
Thanks anyways
Hopefully the customer is going to go for the magnolia or CP12 as it was.
Thanks anyways
- Fri 18 Jan, 2013 5:14 pm
- Forum: Help!
- Topic: Colourmount Board
- Replies: 3
- Views: 1627
Colourmount Board
Hi guys, I had a customer in the other day, it was one of those days were nothing was going well snow was falling heavily I was freezing and not really paying attention. I was going through samples with this customer and we she decided that the mount that would complete her life was Colourmount CP13...
- Mon 14 Jan, 2013 8:20 pm
- Forum: Questions & Suggestions
- Topic: BBest on more than one pc?
- Replies: 3
- Views: 5390
Re: BBest on more than one pc?
Thanks John,
That is pretty much what I expected. I'm running windows 7 on both.
Will it work with a Mac? I was thinking of treating myself in the summer to a nice shiney air book
cheers
Ric
That is pretty much what I expected. I'm running windows 7 on both.
Will it work with a Mac? I was thinking of treating myself in the summer to a nice shiney air book
cheers
Ric
- Mon 14 Jan, 2013 5:40 pm
- Forum: Questions & Suggestions
- Topic: BBest on more than one pc?
- Replies: 3
- Views: 5390
BBest on more than one pc?
I, like so many others have more than one PC/Laptop for work and I was wondering about buying BBest. My questions are: If I install it on my workshop PC can I install on my Laptop also? If I can, then does it run separately, do I have to manually set it up on the laptop to mirror the PC in my worksh...
- Thu 29 Nov, 2012 9:43 am
- Forum: After Hours
- Topic: I'm leaning on the Lamp Column
- Replies: 18
- Views: 17832
Re: I'm leaning on the Lamp Column
Argh councils, don't get me started!
Here are a couple to start you off.
Good luck
LDD - Light Diffusion Device
DIS -Darkness Inhibitor Structure
PNH - Planning Notice Holder
Here are a couple to start you off.
Good luck
LDD - Light Diffusion Device
DIS -Darkness Inhibitor Structure
PNH - Planning Notice Holder
- Wed 28 Nov, 2012 5:48 pm
- Forum: Adverts/Sales/Wants
- Topic: Looking for Mount Cutter Logan or Keencut Ultimate Gold
- Replies: 1
- Views: 1525
Re: Looking for Mount Cutter Logan or Keencut Ultimate Gold
Hi I have a Keencut Artist Plus available if that's any use to you? Have a look at them here: http://www.keencut.com/uk/products/mat-cutter/artist-plus.aspx It is the AP1200 model and is in great condition, I only used it for about a year before I got my CMC. I'm after £270 for it but that would inc...
- Wed 21 Nov, 2012 9:13 am
- Forum: General Discussion
- Topic: WHY?
- Replies: 26
- Views: 7806
Re: WHY?
I bet they're in a hurry for it and start ringing you next week to see when they can come and get it!
I love things in tubes, just makes my day that does
I love things in tubes, just makes my day that does
- Wed 21 Nov, 2012 9:10 am
- Forum: General Discussion
- Topic: IKEA 0 : Bespoke Framers 1
- Replies: 10
- Views: 4019
Re: IKEA 0 : Bespoke Framers 1
Good man!
I do like to see Ikea frames being shoved where the sun don't shine
Serious upselling though, just curious as to how many frames she ordered from you?
I do like to see Ikea frames being shoved where the sun don't shine
Serious upselling though, just curious as to how many frames she ordered from you?
- Thu 08 Nov, 2012 10:08 am
- Forum: General Discussion
- Topic: Mount cutting hooking
- Replies: 4
- Views: 1961
Re: Mount cutting hooking
I used one of these before my CMC, I found that I'd get shallow hooks about every two months.
The answer I found was to just reduce my blade depth and loosen then re tighten the bearings.
It worked for me, you never know it might work on yours.
Ric
The answer I found was to just reduce my blade depth and loosen then re tighten the bearings.
It worked for me, you never know it might work on yours.
Ric
- Fri 19 Oct, 2012 7:34 pm
- Forum: Technology - CMC's Computers Etc
- Topic: Advance training with Gunnar at Lion
- Replies: 3
- Views: 3674
Re: Advance training with Gunnar at Lion
Hi Alan, Hope all is well with the family. I held the car in place with a thin strip of mylar. I did think of using thin wire but I had some strips of mylar lying around from a previous job. It's not perfect and there are things I will do differently next time I do a box but as a learning exercise i...
- Fri 19 Oct, 2012 7:05 pm
- Forum: Technology - CMC's Computers Etc
- Topic: Advance training with Gunnar at Lion
- Replies: 3
- Views: 3674
Advance training with Gunnar at Lion
Evening all. I've had my Gunnar for exactly two weeks now and I attended an advance training day with Sarah and David from Gunnar at Lion yesterday. I have to say I took a lot from the day and feel like I have saved myself hours and hours of general messing around and getting it wrong by doing the d...
- Tue 18 Sep, 2012 10:47 am
- Forum: After Hours
- Topic: From Church Magazines
- Replies: 4
- Views: 3705
Re: From Church Magazines
Quality
- Tue 18 Sep, 2012 10:45 am
- Forum: After Hours
- Topic: My Son's homework, any ideas?
- Replies: 7
- Views: 6275
Re: My Son's homework, any ideas?
A font of knowledge!
I will put them all to him this afternoon and then (try) to get him to research them and write something up.
I don't remember having this much homework at 9
Thank you everyone!
I will put them all to him this afternoon and then (try) to get him to research them and write something up.
I don't remember having this much homework at 9
Thank you everyone!
- Tue 18 Sep, 2012 7:11 am
- Forum: After Hours
- Topic: My Son's homework, any ideas?
- Replies: 7
- Views: 6275
My Son's homework, any ideas?
My son informed me this morning that his homework (to be in Wednesday) was to write about something the Victorians celebrated that we currently do not. I came up with differences in the way we celebrate things and things we celebrate that the Victorians did not, such as Halloween but I just can't th...
- Mon 17 Sep, 2012 11:34 am
- Forum: Technology - CMC's Computers Etc
- Topic: I just "pulled the trigger" on a nice new Gunnar F1 Hybrid
- Replies: 21
- Views: 16555
Re: I just "pulled the trigger" on a nice new Gunnar F1 Hybr
Thanks for the replies. I agree it seems to make sense to get a new one with a half decent spec, I already bought the monitor this morning. A friend was upgrading his monitor and let me have his 22 inch for a bargain price :D I'm hoping to do some creative stuff with it, but for a start it'll be the...
- Sun 16 Sep, 2012 7:11 pm
- Forum: Technology - CMC's Computers Etc
- Topic: I just "pulled the trigger" on a nice new Gunnar F1 Hybrid
- Replies: 21
- Views: 16555
Re: I just "pulled the trigger" on a nice new Gunnar F1 Hybr
That's the exact website I've been looking at for my compressor :D will be ordering it tomorrow. I'm undecided on the PC front. There is a fairly high spec pc not far from me ending on fleabay in the next day or so, or do I play it safe and buy new? I suppose it's the age old question. I've just pai...
- Sun 16 Sep, 2012 11:57 am
- Forum: Technology - CMC's Computers Etc
- Topic: I just "pulled the trigger" on a nice new Gunnar F1 Hybrid
- Replies: 21
- Views: 16555
Re: I just "pulled the trigger" on a nice new Gunnar F1 Hybr
I'm now busy sourcing the list of things that I need to make it work.
Computer, screen, compressor, tubes and of course more customers!
Can hardly wait!!
Computer, screen, compressor, tubes and of course more customers!
Can hardly wait!!
- Tue 11 Sep, 2012 8:55 pm
- Forum: Technology - CMC's Computers Etc
- Topic: I just "pulled the trigger" on a nice new Gunnar F1 Hybrid
- Replies: 21
- Views: 16555
I just "pulled the trigger" on a nice new Gunnar F1 Hybrid
So, I'm very excited! I would just like to extend my thanks to both Sarah and David at Gunnar for their patients and enthusiasm. They put up with me asking all sorts of silly questions and took the time to show and talk me through things. So I have made the order and it should be with me early Octob...
- Sat 21 Jul, 2012 8:48 pm
- Forum: After Hours
- Topic: Plane to see
- Replies: 8
- Views: 4592
Re: Plane to see
That is pretty cool, strange how it shows my house just from a post code though