The Framers Forum

We have a Valiani Mount Cutter with a Vacuum bed and it is great will cut Jumbo with cut shapes etc, but it about how much you use if for these things, there are different heads etc, cutting boxes, scoring card and all sorts you can do. TGS sometime have used models and are worth asking.

I would say that one of the more important parts is to ensure that customer has the artwork lifted off the wall so it does not seal and draw damp in.

Not sure if this helps but we used to cut a piece of mdf put a d ring or split ring in it and then glue it to the board. A bit rough but works.

Joe

Just so you know, you can use Inksccape and it is free, bit more trouble to upload but the line colours are all that is important, you save as .SVG.

Drytac are also in Canada by the way.

The bow springs lion sell are good as they are screwed in and keep the work to the front.

7937 VuPlex Plastic Surface Cleaner & Anti-Static Polish 375g Aerosol

FR Warren in Avonmouth do it all.

This is not entirely unusual I would suggest to the customer to lift if off the wall if possible, even though this may not stop the problem it may help.

GDPR - Controls how we use data, is it being used for the purpose it was collected, am I sharing it with the company of which I use their software, are they going to use it or have access to it? When you are using data no matter how it is stored for a purpose other than the intended reason it was gi...

Maybe something to try if you have enough room is to pre fit backloander tabs in the frame and use the minimum amount of staples. We sometime have to do this.

just for your info this is available https://bambristol.co.uk/products/recor ... rame-black

I have done quite a bit of investigation on this. The issue is one of vicarious liability an insurance company will always try to regain any losses that it has made. This would in the case of a framer us. If the persons insurance company will come after the company that damages the work. There is th...

Daler-Rowney have moved warehouse and are not delivering as normal. The conversation I had with a member of the phone team was they could not and would not prioritise any company and if I wanted to move suppliers I was welcome to.

Hi we produce a lot of both photographic and art reproductions for a wide range of customer both trade and private. It is not just printing a photo customers will have a very clear idea of the image they expect. We have got a photo printing booth with Epson D700 printers then it is down to the custo...

Hi we produce a lot of both photographic and art reproductions for a wide range of customer both trade and private. It is not just printing a photo customers will have a very clear idea of the image they expect. We have got a photo printing booth with Epson D700 printers then it is down to the custo...

We bought some 8ft from Avondale electrics in Bristol no wiring changes needed.

We have customers who regularly send out packaged frames, if you customer chooses a good solid moulding and has regular sizes it would be best to have boxes made.