Hi Alain,
Yes of course I will send you pictures. I will need a little time, can you please email your link to
"myart@thecanvasartstudio.co.uk "
I will get some over to you today & tomorrow
Kind regards,
Joe
Search found 21 matches
- Sat 09 Nov, 2019 12:08 pm
- Forum: Adverts/Sales/Wants
- Topic: Looking for machines for framing and tools
- Replies: 6
- Views: 2313
- Sat 09 Nov, 2019 10:20 am
- Forum: Adverts/Sales/Wants
- Topic: SELLING EVERYTHING
- Replies: 2
- Views: 1537
SELLING EVERYTHING
Hi, I have just had some very bad news from the hospital. Depending on what news I get in the next couple of weeks, I will be selling EVERYTHING from a fully fitted custom studio. You will never need to buy anything else. I would like to sell everything as a job lot EVERYTHING BELOW IS IN PERFECT CO...
- Sat 09 Nov, 2019 10:18 am
- Forum: Adverts/Sales/Wants
- Topic: Looking for machines for framing and tools
- Replies: 6
- Views: 2313
Re: Looking for machines for framing and tools
Hi, I have just had some very bad news from the hospital. Depending on what news I get in the next couple of weeks, I will be selling EVERYTHING from a fully fitted custom studio. You will never need to buy anything else. I would like to sell everything as a job lot EVERYTHING BELOW IS IN PERFECT CO...
- Fri 18 Oct, 2019 10:39 am
- Forum: Adverts/Sales/Wants
- Topic: Framers Mate
- Replies: 11
- Views: 5332
Re: Framers Mate
Hi,
We are at the wrong end of the country. If I bought this, would you consider wrapping it for my DHL courier to collect?
Thanks,
Joe
Tel 07624476867
We are at the wrong end of the country. If I bought this, would you consider wrapping it for my DHL courier to collect?
Thanks,
Joe
Tel 07624476867
- Wed 10 Apr, 2019 12:10 am
- Forum: Adverts/Sales/Wants
- Topic: VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSOR
- Replies: 3
- Views: 2298
Re: VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSO
This is now sold,
Thank you, everyone, for your help
Kind regards,
Joe
Thank you, everyone, for your help
Kind regards,
Joe
- Tue 02 Apr, 2019 12:54 pm
- Forum: Adverts/Sales/Wants
- Topic: VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSOR
- Replies: 3
- Views: 2298
Re: VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSO
THE VALIANI IS NOW OPEN TO ANY OFFERS - PLEASE CALL ME ON 07624-476867
- Tue 26 Mar, 2019 4:37 pm
- Forum: Adverts/Sales/Wants
- Topic: VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSOR
- Replies: 3
- Views: 2298
VALIANI PNEUMATIC 120 MOUNT-CUTTER + BRAND NEW COMPRESSOR
VALIANI 120 PNEUMATIC PICTURE FRAMING MOUNT-CUTTER WITH 2 SPARE HEADS GOOD WORKING CONDITION. + BRAND NEW COMPRESSOR £1,300 [/b] CALL ANYTIME 07624-476867 The condition is Used. but good working order1This is a brilliant machine & comes with 2 other heads, interchangeable parts as well. It also...
- Thu 11 Oct, 2018 8:30 pm
- Forum: Adverts/Sales/Wants
- Topic: 1.5.MM. 2.MM ACRYLIC & 2MM FLOAT GLAS SUPPLIERS
- Replies: 0
- Views: 2252
1.5.MM. 2.MM ACRYLIC & 2MM FLOAT GLAS SUPPLIERS
HI,
Does anybody know reasonabley priced suppliers of
1) 2mm float glass
2) 1.5 & 2mm Acrylic
I would be most grateful if anyone can be of help.
CONTACT DETAILS
joe@thecanvasartstudio.co.uk
Tel 07624476867
Does anybody know reasonabley priced suppliers of
1) 2mm float glass
2) 1.5 & 2mm Acrylic
I would be most grateful if anyone can be of help.
CONTACT DETAILS
joe@thecanvasartstudio.co.uk
Tel 07624476867
- Mon 01 Oct, 2018 5:16 pm
- Forum: Adverts/Sales/Wants
- Topic: Chevron Towers For Sale
- Replies: 5
- Views: 3876
Re: Chevron Towers For Sale
What's happening with the chevron display towers? are you going to accept my offer, if so can you please let me know so I can arrange collection??
Kind regards
Joe
Kind regards
Joe
- Thu 27 Sep, 2018 9:43 pm
- Forum: Adverts/Sales/Wants
- Topic: Chevron Towers For Sale
- Replies: 5
- Views: 3876
Re: Chevron Towers For Sale
I'm interested if you wish to contact me,
Thanks
Joe
Thanks
Joe
- Wed 26 Sep, 2018 8:54 am
- Forum: Adverts/Sales/Wants
- Topic: PNEUMATIC UNDERPINNER WANTED URGENTLY
- Replies: 1
- Views: 1238
PNEUMATIC UNDERPINNER WANTED URGENTLY
Hi everyone, BACKSTORY Our local government has decided to close the local workshop for the disabled after 34 years putting everyone out of work but giving themselves a 22% pay rise at the same time.....very nice I hope someone can help us out. I would like to offer a couple of the disabled people j...
- Wed 29 Aug, 2018 11:40 pm
- Forum: Adverts/Sales/Wants
- Topic: Backpinner for SALE
- Replies: 2
- Views: 2254
Re: Backpinner for SALE
Hi Rosa,
We spoke about your undeprinter yesterday. If the guy didn't get back to you, can you please contact me
Joe 07624 476867. I could do with knowing if its gone or not
Thanks
Joe
We spoke about your undeprinter yesterday. If the guy didn't get back to you, can you please contact me
Joe 07624 476867. I could do with knowing if its gone or not
Thanks
Joe
- Tue 13 Sep, 2016 6:57 pm
- Forum: General Discussion
- Topic: airbrush kit
- Replies: 3
- Views: 3437
airbrush kit
Hi, I am toying with the idea of using an airbrush kit for painting timber frames. I am used to using a sprayer for coating my canvas artwork but nothing smaller like an airbrush. Could anyone give me some advice if this is a good idea and what I should be looking to buy. The help would be appreciat...
- Sat 10 Sep, 2016 10:41 pm
- Forum: The Good, The Bad, And The Ugly
- Topic: T-Shirt Frame
- Replies: 7
- Views: 10560
Re: T-Shirt Frame
I can confidently say that this has been done by someone with acute insomnia, lying in bed at about 4 am with a skinful, Jumping up and deciding it was a good idea. I would have loved to have seen his face when he looked at it in the cold light of day. sober.....mmmmm I think that maybe he should ge...
- Sat 10 Sep, 2016 12:11 am
- Forum: Adverts/Sales/Wants
- Topic: WALL MOUNTED GLASS CUTTER WANTED & KEENCUT ULTIMAT GOLD KIT
- Replies: 0
- Views: 1848
WALL MOUNTED GLASS CUTTER WANTED & KEENCUT ULTIMAT GOLD KIT
I am looking for a wall mounted or freestanding glass cutter urgently. anything considered, but my budget is tight. Is there anyone who can help me. I am also looking for a wall mount kit for my ultimat gold 1200 You can contact me at work on 01624-679738 mobile 07624-476867 Email: myart@thecanvasar...
- Sat 10 Sep, 2016 12:04 am
- Forum: Adverts/Sales/Wants
- Topic: Pistorius underpinner for sale
- Replies: 6
- Views: 5067
Re: Pistorius underpinner for sale
Hi Do you have any images of the underpinner & what seems to be wrong with it?
- Fri 05 Aug, 2016 10:16 pm
- Forum: Help!
- Topic: custom frame Pricing general advice
- Replies: 13
- Views: 4827
Re: custom frame Pricing general advice
Hi,
Thank's for the reply. Unfortunately it's 11.10pm here at the moment and I
am still in the studio. My wife is going ape (shes just rang me)
Can you send me some info or a link with prices etc.. so I can have a look
in the morning?
My email is: joe@thecanvasartstudio.co.uk
Many thank's
Joe
Thank's for the reply. Unfortunately it's 11.10pm here at the moment and I
am still in the studio. My wife is going ape (shes just rang me)
Can you send me some info or a link with prices etc.. so I can have a look
in the morning?
My email is: joe@thecanvasartstudio.co.uk
Many thank's
Joe
- Fri 05 Aug, 2016 9:37 pm
- Forum: Help!
- Topic: custom frame Pricing general advice
- Replies: 13
- Views: 4827
Re: custom frame Pricing general advice
Hi Everyone, Really appreciate the replies & advice. This is obviously a lot more complex than the formulas that I use for canvas framing! I really do need to get it right. Does anyone have any suggestions on software? There seems to be quite a few on offer, but starting out, we are not sure whi...
- Thu 04 Aug, 2016 2:03 pm
- Forum: Help!
- Topic: custom frame Pricing general advice
- Replies: 13
- Views: 4827
custom frame Pricing general advice
Hi, We run a canvas framing studio. We were always being asked to frame pictures, so we decided to invest in a decent underpinner, mat/mountcutter & all the relevant tools ect. We have been running our studio for over 3 years, so we do know about canvas but not a great deal about picture framing...
- Sun 13 Mar, 2016 2:56 pm
- Forum: Introductions
- Topic: New Member who needs guidance
- Replies: 6
- Views: 4811
Re: New Member who needs guidance
Thank you both for getting back to me. The island is a nice place to live and thank you for your comments on the studio. I know it's not going to be easy. I may be able to get they guy who has retired to come in for a few days. A morso would be good but the workshop has limited space. As regards to ...