The Framers Forum

Hi thank you for your replies, I managed to find the fault yesterday, there is a rectangle thing close to where you adjust the air pressure which has a black box with a wire coming from it screwed to the bottom with a plastic nut thing, the nut had fell off and the black box had slipped off of a cop...

Hi, we have a problem with one of our cassese 3099ultra underpinners. When i try to pin a frame the hammer comes up four times in quick succession but fails to add one pin, i don't understand this as its only supposed to add two pins in the first location anyway? any help would be much appreciated. ...

I fixed it, the problem was a lose allen bolt had come loose on the part that the wedges slide into and it was getting caught.

Thanks anyway

Brian

Hi Mark, the pinner is a cs 3099 ultra, unfortunatly i can't pull or push it, its as though the teeth of the motor are jammed on the rail.

Hello, today we had a wedge that didn't quite go entirely into the frame and as the machine tried to move to next wedge position the motor cog began bouncing off the toothed rack, the operator didn't use to the emergency stop and as a result the motor now seems to be stuck and constantly makes the n...