The Framers Forum

Thanks Alan, will check out thanks

Agree, I think it's an expensive option to buy the tool when other solutions involving a tube work very well

Thanks for the reply. Yes min order qty is 100ft or 30m. Same for Rose and Hollis who would also make the profile in oak for me. Unfortunately too much for what's required by customer.
Appreciate the response thanks, Tony

Hi Mark, agreed, I'm sure that the little shop in Peebles has probably had those samples for quite some time. Unless they make them themselves

Thanks for the reply, I did offer this solution as I actually have a couple of lengths of pine in stock from years back. Customer didn't like this option, however I suspect they may have to compromise or pay more for what they really want

Hi Folks, A customer of ours are looking for oak frames for their canvases. Width approx 65mm. The closest I can find to what they are looking for is the attached from Rose and Hollis. Appreciate any help in sourcing a moulding. All of the main suppliers have a limited range of profiles. I also offe...

HELP !!
Desparately need a length or 2 of the 40mm wide Anvil product by Arqadia part number 462620, anyone have stock or know of anyone ?
Many Thanks
Tony

Thanks everyone for your support and responses. In summary: - Manaquin is a great idea if space wasn't a concern for customer - the suit is in fact tiny as its figure hugging and is contoured to body with sculpted padding in lower half so creating a neat elegant shape is almost impossible - top half...

Thanks Mark, in discussion with customer as they don't want a 3d frame due to space.

wow looking good, ..... I may use this to show customer if that's ok ..... initially when I mentioned 3D his response was they had no space, thanks again....

Thanks, I'd considered this however the customer doesn't have the space for his and the other 2 of the 3 are gifts for coach and parents

I have been asked by a cyclist to frame 3 full suits worn when representing his country. I'm happy with the top half, however they have the padding in the shorts area and look as if they are for a child as they are skin tight. Has anyone framed a full suit with the padding and if so do you have a pi...

I now have both secured.
Tony

Now just require a JM34 or equivalent ? Any input , recommendations on what to buy appreciated. Need to dry mount 100's of boards width 780mm.
Thanks !
Tony

Looking to purchase an Excaliber 5000 and a drytac JM34 or something of a similar spec. Good second hand or new... appreciate any advice.
Many Thanks
Tony

Hi, what do you have left ?
Thanks
Tony