Search found 323 matches
- Fri 10 Apr, 2015 11:56 pm
- Forum: Help!
- Topic: Cutting Narrow Slivers/Strips of Glass
- Replies: 27
- Views: 9082
Re: Cutting Narrow Slivers/Strips of Glass
Ok , I'll concede that one, posh glass offcuts are made to fit..........still dont nibble though, I refuse to put a bit of glass in a frame with chewed edges, as you said, I'd rather lose a few mm off a mount
- Fri 10 Apr, 2015 6:35 pm
- Forum: Help!
- Topic: Cutting Narrow Slivers/Strips of Glass
- Replies: 27
- Views: 9082
Re: Cutting Narrow Slivers/Strips of Glass
Not really sure why people are needing these pliers so much, I must cut an average of 35 bits of glass a week, often quite a bit more and if I get one that needs trimmed/nibbled a month I'd be lying, more like 5 or 6 times a year
- Fri 10 Apr, 2015 8:34 am
- Forum: Help!
- Topic: Cutting Narrow Slivers/Strips of Glass
- Replies: 27
- Views: 9082
Re: Cutting Narrow Slivers/Strips of Glass
Normal pliers here too, I do have the proper ones but they lie in a box along with a lot of other fairly useless stuff. I use normal pliers quite a lot so it's a tool that is kept close by. If you get a proper even score the glass should come away as normal.......agree with the above comment about n...
- Mon 30 Mar, 2015 5:04 pm
- Forum: Help!
- Topic: Multi-aperture double mount help please
- Replies: 14
- Views: 5989
Re: Multi-aperture double mount help please
Exactly as above, cut the ten undercounts as singles, then measure all your apertures on the mounts(in case you get one or two slightly out), then draw out your 10 aperture single top mount
- Sat 07 Mar, 2015 9:12 pm
- Forum: Help!
- Topic: Compressor attachments
- Replies: 10
- Views: 3975
Re: Compressor attachments
Are they not pcl couplings/connectors? I could be totally wrong but I'll check once off my phone
- Sat 07 Mar, 2015 5:13 pm
- Forum: After Hours
- Topic: Backing Board Resize
- Replies: 8
- Views: 7269
- Fri 06 Mar, 2015 4:43 pm
- Forum: General Discussion
- Topic: Gunk on scissors.
- Replies: 17
- Views: 7960
Re: Gunk on scissors.
Napalm
- Tue 03 Mar, 2015 9:18 pm
- Forum: Help!
- Topic: At a complete loss now.....
- Replies: 11
- Views: 4393
Re: At a complete loss now.....
Are the blades being hollow ground?
- Tue 03 Mar, 2015 2:18 pm
- Forum: The Good, The Bad, And The Ugly
- Topic: Double skin mountboard cove box
- Replies: 2
- Views: 3863
Re: Double skin mountboard cove box
You look different than I'd imagined
- Mon 02 Mar, 2015 11:00 pm
- Forum: Help!
- Topic: Morso misery....
- Replies: 5
- Views: 2654
Re: Morso misery....
Where are you? To get you out of a hole this week you could go to someone else nearby(ish) if you can find someone. Would be a good time to examine a working morso too. If you are close enough to Glasgow I could possibly help, but I get the feeling you are quite far up......and I'm away a few days t...
- Fri 23 Jan, 2015 7:14 am
- Forum: General Discussion
- Topic: Football shirt framing
- Replies: 5
- Views: 4147
Re: Football shirt framing
Cut the label off(if the customer is happy with that)
- Wed 14 Jan, 2015 12:30 am
- Forum: Introductions
- Topic: Hello!
- Replies: 5
- Views: 4663
Re: Hello!
Welcome along
- Tue 02 Dec, 2014 11:45 am
- Forum: Help!
- Topic: Morso Height Adjustment
- Replies: 4
- Views: 2131
Re: Morso Height Adjustment
Yes , if you look over the top of the cutting head you'll see a fixed rod going down to the pedal mechanism, it's got a bolt either side, loosen the top one and then ajust the bottom one, then re tighten the top one
- Fri 28 Nov, 2014 12:04 am
- Forum: Help!
- Topic: Help needed
- Replies: 5
- Views: 2581
Re: Help needed
Cut a reverse corner and place it in when pinning it, it's just like pinning a square profile
- Tue 25 Nov, 2014 9:15 am
- Forum: Business Matters
- Topic: Delivery options?
- Replies: 13
- Views: 9784
Re: Delivery options?
Aardvark, then you can relax, no worrying about any breakages etc, plus you don't have to wrap them differently than you normally would.....(as long as you do wrap them )
- Thu 20 Nov, 2014 12:44 pm
- Forum: General Discussion
- Topic: Weirdest framing request
- Replies: 13
- Views: 6750
Re: Weirdest framing request
An old pocket watch that had to be hinged so it could be wound, a sporran, snake skin 9ft long. Couple of shovels of sand off a certain beach, driftwood from same place.
- Mon 10 Nov, 2014 4:39 pm
- Forum: Help!
- Topic: Moulding ID
- Replies: 2
- Views: 1567
Re: Moulding ID
Looks a bit like this
http://www.arqadia.co.uk/productdetails ... =676358000
But I'm on my phone and I think this one is about 85mm
http://www.arqadia.co.uk/productdetails ... =676358000
But I'm on my phone and I think this one is about 85mm
- Sun 02 Nov, 2014 2:28 pm
- Forum: Help!
- Topic: Glass on large item
- Replies: 9
- Views: 2873
Re: Glass on large item
Forsyth Glazing in glasgow will do the glass I'm sure, would have to be 4mm at that size is guess
- Mon 27 Oct, 2014 1:06 pm
- Forum: General Discussion
- Topic: General State of Play
- Replies: 15
- Views: 5551
Re: General State of Play
Measure, assemble, repeat
- Mon 20 Oct, 2014 5:38 am
- Forum: Announcements
- Topic: National Gallery Frame Appeal
- Replies: 7
- Views: 6456
Re: National Gallery Frame Appeal
Total waste of money