Hi Elly
It could be any of the above, but I have had problems with new blades cutting ash. I find that it has to be nibbled at one notch at a time, but now I use the chop saw which gives a perfect joint
Steve
Search found 699 matches
- Wed 08 Dec, 2010 10:16 pm
- Forum: General Discussion
- Topic: morso pushing
- Replies: 16
- Views: 5102
- Mon 15 Nov, 2010 9:15 am
- Forum: Business Matters
- Topic: Compressor inspections
- Replies: 10
- Views: 8636
Re: Compressor inspections
Many thanks Guys for this information. I have checked my insurance policy and it is very vague on what is/is not covered in terms of pressure equipment, but there is a specific note on steam pressure vessels (boilers) but not on air systems. The point that JFeig makes is very valid in that there is ...
- Sun 14 Nov, 2010 8:12 pm
- Forum: General Discussion
- Topic: New to Matting - want to move onwards
- Replies: 3
- Views: 1576
Re: New to Matting - want to move onwards
Hi Chris and welcome Nick is absolutely dead on. There is an old saying from woodworkers and that is that buy the best tools you can possibly afford because its only those that will give you professional results. It doesnt really matter how good you are manually doing any of these tasks, but without...
- Sun 14 Nov, 2010 7:59 pm
- Forum: Adverts/Sales/Wants
- Topic: WANTED PRICING CHART
- Replies: 30
- Views: 9744
Re: WANTED PRICING CHART
I would love a copy if possible please. Email to www.admin@decormount.com. many thanks in advance and sorry you are being inundated, but its something I haven't come across before.
Regards
Steve
Regards
Steve
- Sun 14 Nov, 2010 1:57 pm
- Forum: Business Matters
- Topic: Compressor inspections
- Replies: 10
- Views: 8636
Compressor inspections
Hi Like most of us, I use air compressors to run the underpinner and CMC and was wondering whether it is necessary to inspect these compressors for insurance purposes. I remember years ago we had "engineering insurance" which covered pressure vessels, but I currently do not have any specif...
- Tue 09 Nov, 2010 8:40 pm
- Forum: General Discussion
- Topic: Green Framing
- Replies: 15
- Views: 4071
Re: Green Framing
There is a lot of hot air spoken about "environmentally friendly" this and "carbon footprint" that but those spouting this stuff are using electricty in the media or paper for printed word - or even worse standing outside an empty building at 10pm at night with a mssive film crew...
- Mon 01 Nov, 2010 7:52 pm
- Forum: General Discussion
- Topic: Framing Morale required!
- Replies: 10
- Views: 3069
Re: Framing Morale required!
Hi V-Nail Sad to hear you are having problems. We all do- even when experienced. Cant really comment on the mount cutteras we are computerised and dont even own a manual one, but on your morso it is a good idea to check blade alignment. The two blades should make a perfect Vee and be equal at the bo...
- Sat 30 Oct, 2010 10:41 pm
- Forum: General Discussion
- Topic: new to the business!
- Replies: 8
- Views: 2336
Re: new to the business!
Hi Biscuit Welcome to the world of framing. I believe that the best solution is always to buy the best equipment you can afford and all woodworkers will tell you the same. It pays handsomely in the long run. The excalibur 5000 is an excellent tool and is far better than doing it by hand. We used to ...
- Thu 28 Oct, 2010 10:29 am
- Forum: Adverts/Sales/Wants
- Topic: Selling up - everything must go ...
- Replies: 4
- Views: 2324
Re: Selling up - everything must go ...
If you are spliiting this lot up I would be interested in the guillotine
Steve
Steve
- Fri 15 Oct, 2010 8:21 am
- Forum: General Discussion
- Topic: Chipping on Moulding Corners
- Replies: 11
- Views: 7819
Re: Chipping on Moulding Corners
Robo has the answers here, but expanding further - any gesso style moulding is prone to chipping even with sharp blades in morsos and I have a long list of mouldings that I use on the chopsaw. The answer is a decent quality chopsaw which is worth its weight in gold.
- Sat 09 Oct, 2010 9:06 pm
- Forum: General Discussion
- Topic: PPL
- Replies: 33
- Views: 7512
Re: PPL
This is crazy isn't it? NOBODY (person) has to pay a fee to have a radio and listen to its content. Yet it is being argued that a licence is necessary to listen to said radio by all those people who can listen to it for free. if they wandered in to the shop with a ghettoblaster playing music, would ...
- Mon 04 Oct, 2010 7:33 pm
- Forum: General Discussion
- Topic: Buying in mounts
- Replies: 12
- Views: 3654
Re: Buying in mounts
Hi Viv
We do online mountcutting for framers and the public. 48 hour turnaround and very competitive prices Check out our website http://www.decormount.com
We can do it all by telephone too with card payments
Regards
Steve
We do online mountcutting for framers and the public. 48 hour turnaround and very competitive prices Check out our website http://www.decormount.com
We can do it all by telephone too with card payments
Regards
Steve
- Wed 29 Sep, 2010 6:57 pm
- Forum: General Discussion
- Topic: Storage of mouldings - Horizontal or Vertical?
- Replies: 11
- Views: 6410
Re: Storage of mouldings - Horizontal or Vertical?
Hi Fusion We have stored mouldings in bothe directions. In the last unit we had I stored them vertically, but to be honest it was difficult to quickly identify what we had in stock without moving loads - and then they would drop off the racks and damage. Our current unit is much larger and we carry ...
- Mon 27 Sep, 2010 6:11 pm
- Forum: Adverts/Sales/Wants
- Topic: HOT GLASS VACUUM PRESS WANTED!
- Replies: 12
- Views: 5825
Re: HOT GLASS VACUUM PRESS WANTED!
Hi Peter
I too have a HGP 220 which I can sell you. It has been used very, very little and I bought it new off a framer who had purchased it and never took it out of the box.
Its your for a grand. let me know if you are interested.
Regards
Steve
I too have a HGP 220 which I can sell you. It has been used very, very little and I bought it new off a framer who had purchased it and never took it out of the box.
Its your for a grand. let me know if you are interested.
Regards
Steve
- Sun 26 Sep, 2010 10:32 pm
- Forum: General Discussion
- Topic: Under-pinners
- Replies: 25
- Views: 10431
Re: Under-pinners
Huh I have just sold an Ultimo on ebay today which went for an astounding 20 quid. Problems with them are that mountboards slump and end up with a bow in them. We use plan chests now - loads of em, but then we have over 50 mountboards in stock and a pile of Arqadia I bought at auction last year (250...
- Thu 16 Sep, 2010 6:51 pm
- Forum: General Discussion
- Topic: what too do with broken/waste glass
- Replies: 4
- Views: 1536
Re: what too do with broken/waste glass
Glass seems to be designated a controlled waste these days so long gone the days when you could nip off to the tip and sling it in a skip. Most glass suppliers offer a service for collecting cullage (off-cuts) which is very reasonable. They provide a plastic box and when you re-order glass they coll...
- Tue 14 Sep, 2010 7:06 pm
- Forum: General Discussion
- Topic: Simons
- Replies: 16
- Views: 4566
Re: Simons
Well, of all our moulding suppliers, we used to have most from Simons. The largest selection and the best prices. The trouble is the damage when we recieve it. It got so bad last year that I wrote to the Directors and complained because it was not the carriers. Simons use the same carrier as Lion an...
- Mon 13 Sep, 2010 9:04 am
- Forum: General Discussion
- Topic: Moulding offcut storage
- Replies: 21
- Views: 5749
Re: Moulding offcut storage
We use the vertical storage method but offcuts get attached to full lengths with pallet wrap. That way it keeps batches together so that there is uniformity in the mouldings. We used to have the box storage method but they came out damaged after rummaging through for one bit (usually unsuccessfully)...
- Mon 14 Jun, 2010 6:14 pm
- Forum: Adverts/Sales/Wants
- Topic: FS - Full Workshop Equipment and Accessories
- Replies: 10
- Views: 4145
Re: FS - Full Workshop Equipment and Accessories
Hi
Is the heat press still for sale and if so what is the make and size please. Also how much is it?
Cheers
Steve
Is the heat press still for sale and if so what is the make and size please. Also how much is it?
Cheers
Steve