Search found 452 matches: mainline
Searched query: +mainline
- Thu 27 Oct, 2016 7:56 pm
- Forum: Help!
- Topic: looking for an ornate wooden frame
- Replies: 1
- Views: 2764
looking for an ornate wooden frame
... like to be able to offer them something at least. I'm wondering about an ornate moulding and using a slip to give a bit more depth. I've looked at mainline and wessex but their ornate moulding are mostly gold/silver. Does anyone do an ornate wooden moulding?
- Wed 26 Oct, 2016 9:31 am
- Forum: Help!
- Topic: Anyone recognise this moulding?
- Replies: 4
- Views: 5084
Anyone recognise this moulding?
... been much help - I suppose they are interested in the painting rather than the frame. The colour is a dark grey - I thought I had found it in the Mainline catalogue but their profile in concave and this one according to customer is a dome. I don't think he wants the white inner frame, just the ...
- Tue 11 Oct, 2016 1:17 pm
- Forum: General Discussion
- Topic: morso blade sharpening
- Replies: 8
- Views: 7976
Re: morso blade sharpening
You really need someone one with a proper Morso hollow ground machine. My recommendation would probably have to be Mainline. You will have to send them away but you will know that they will come back very sharp.
- Fri 07 Oct, 2016 10:08 am
- Forum: Help!
- Topic: Anyone recognise this moulding?
- Replies: 2
- Views: 3113
Anyone recognise this moulding?
Hi
It's plastic/polcore, I've checked the mainline site but can't see anything similar. 40mm wide 30mm deep, there's also a matching fillet/slip.
Any pointers would be great
Cheers
Steven
It's plastic/polcore, I've checked the mainline site but can't see anything similar. 40mm wide 30mm deep, there's also a matching fillet/slip.
Any pointers would be great
Cheers
Steven
- Tue 04 Oct, 2016 5:14 pm
- Forum: General Discussion
- Topic: Arqadia's Woeful stock control
- Replies: 15
- Views: 10634
Re: Arqadia's Woeful stock control
... OP knows is due to Korean shipping company going bust and nothing coming of the ships, hardly arqadia's fault. It could have just as easily been mainline Ashworth and Thomson, lion or simons.
- Tue 23 Aug, 2016 6:52 pm
- Forum: Help!
- Topic: Blade sharpening
- Replies: 4
- Views: 3237
Re: Blade sharpening
Same for us ^^^^. We send 3 sets at a time as this makes it more economical for the cost of posting. Mainline do all the arranging, you just have to have them ready in a parcel for collection. We've used Mainline for years and have always been very happy with their service. ...
- Tue 23 Aug, 2016 12:41 pm
- Forum: Help!
- Topic: Blade sharpening
- Replies: 4
- Views: 3237
Re: Blade sharpening
I send mine to Mainline. They arrange the pickup and delivery.
- Mon 22 Aug, 2016 11:31 am
- Forum: Help!
- Topic: Moulding ID please
- Replies: 5
- Views: 4055
Re: Moulding ID please
There's this one from Mainline. ref 502 0011
It's 88mm wide though.
It's 88mm wide though.
- Sat 11 Jun, 2016 3:31 pm
- Forum: Help!
- Topic: Frame Visualisation Software with Camera
- Replies: 3
- Views: 3512
Frame Visualisation Software with Camera
Im looking for Frame Visualisation Software where I can take photos of of ready made frames in realistic look as they are. Ive tried Mainline but the visualisation on the frames are not very realistic. The system we can looking for is something with a camera on the ceiling that takes the ...
- Thu 09 Jun, 2016 11:34 am
- Forum: General Discussion
- Topic: Sharpened Morso Blades
- Replies: 6
- Views: 7209
Re: Sharpened Morso Blades
I have resumed using Mainline now for blade sharpening. I am fortunate in that I can drop my blades off and pick them up myself. I thought I would just mention why I stopped using the other (well known) company. I write on my blades ...
- Wed 08 Jun, 2016 9:36 am
- Forum: Help!
- Topic: Yellow oak
- Replies: 9
- Views: 6298
Re: Yellow oak
I would look the mainline veneers then they are quite pale and unfinished, they also have the advantage that you can cut them easily on the morso and they pin well.
- Tue 07 Jun, 2016 2:00 pm
- Forum: Help!
- Topic: Yellow oak
- Replies: 9
- Views: 6298
Re: Yellow oak
Most of the oak I buy from arqadia and Simons tends to quite dark and probably wouldn't stain yellow, however I think Mainline does an unfinished veneer which is quite pale and would take a stain.
- Fri 03 Jun, 2016 10:15 am
- Forum: General Discussion
- Topic: Sharpened Morso Blades
- Replies: 6
- Views: 7209
Re: Sharpened Morso Blades
... sharp. I think they guy said the edge was too fine. At least there was no 'arguing' & I'm hopeful it'll work out for the best. I've considered mainline but the cost with shipping was quite expensive, around £60 if I remember correctly. At the moment it's £12 collected & returned to my door. ...
- Fri 03 Jun, 2016 9:44 am
- Forum: General Discussion
- Topic: Sharpened Morso Blades
- Replies: 6
- Views: 7209
Re: Sharpened Morso Blades
I would send them to Mainline and get them properly sharpened on a morso blade sharpener.
If you do get them done locally make sure they are hollow ground.
If you do get them done locally make sure they are hollow ground.
- Sun 17 Apr, 2016 11:15 am
- Forum: Help!
- Topic: 3 frames jointed together
- Replies: 7
- Views: 4141
Re: 3 frames jointed together
Hi, some good ideas and food for thought. I like the mainline system. I have a Morso and Mitre cutter but the Mitre cutter I have is not as accurate as I would like (it cuts the correct angle but tends to leave a slighly rounded edge as it addresses ...
- Sat 16 Apr, 2016 9:27 pm
- Forum: Help!
- Topic: 3 frames jointed together
- Replies: 7
- Views: 4141
Re: 3 frames jointed together
Mainline mouldings do a system that may work depending on what frame style she wants
http://mainlinemouldings.com/index.php? ... goryID=787
http://mainlinemouldings.com/index.php? ... goryID=787
- Thu 31 Mar, 2016 2:09 pm
- Forum: Technology - CMC's Computers Etc
- Topic: Software
- Replies: 8
- Views: 8897
Software
... options. Things which are attractive in possible software upgrades are the ability to download current price lists from major suppliers (Arqadia/Mainline/Simmons etc) and more customization. We have been looking at FramR but this software does not seem to have the ability to add several jobs ...
- Fri 25 Mar, 2016 8:53 pm
- Forum: Help!
- Topic: Mainline All size stretcher Bars
- Replies: 7
- Views: 4951
Re: Mainline All size stretcher Bars
I got some had the same problem as others. In the end I just gave up and chucked the lot in the bin.
- Fri 25 Mar, 2016 2:04 pm
- Forum: Help!
- Topic: Mainline All size stretcher Bars
- Replies: 7
- Views: 4951
Re: Mainline All size stretcher Bars
... something else when my current stock runs out. I don't think the magic morso rebate support that slides into slots is a common accessory, though mainline did kindly offer to look on ebay for me. It is a lot of faffing to feed the sacrificial mdf to the morso which only makes a quick job much ...
- Thu 24 Mar, 2016 4:21 pm
- Forum: Help!
- Topic: Mainline All size stretcher Bars
- Replies: 7
- Views: 4951
Re: Mainline All size stretcher Bars
Thanks for the link. :D It looks like they have added the back slot to counteract the twist. Not sure it would cure the prob completely. More ready cut-bits to buy...... IMHO it's a case of over-thinking or re-inventing the wheel. btw. On the Wessex (think Simons do it as well) stuff I cut my own tr...