Handgun

Post examples...
Of framing styles or techniques that rocked your boat, and also of those that didn't

Handgun

Postby newie31 » Wed Feb 03, 2016 10:25 pm

Being ex-job, I have framed loads of police medals, whistles etc in the past, even the leather breast plate from a police horse, I have been meaning to do this for some time now, but it’s always been on the back burner, I bought a mighty mount gun holder to hold the gun in place but it didn’t fit very well and looked really cumbersome, so I tried it with melinex strips and I don’t think it came out too bad in the end.

It’s a replica Glock 17 which you can buy over here in France; apparently in the UK they have to be bright Orange or Blue so you cannot use them to rob your local petrol station!

WP_20160130_007a.jpg
WP_20160130_007a.jpg (376.77 KiB) Viewed 15155 times

WP_20160130_005a.jpg
WP_20160130_005a.jpg (331.63 KiB) Viewed 15155 times
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Gunnar Computerised Mountcutters

Re: Handgun

Postby Jamesnkr » Thu Feb 04, 2016 9:26 am

newie31 wrote: apparently in the UK they have to be bright Orange or Blue so you cannot use them to rob your local petrol station!


Because of course you couldn't colour a bright blue one with black (I'd use black shellac), and if you did, the petrol station attendant would immediately realise...
Jamesnkr
 
Posts: 1449
Joined: Mon Apr 18, 2011 10:25 am
Location: London, UK
Organisation: London UK
Interests: framing

Re: Handgun

Postby prospero » Thu Feb 04, 2016 10:43 am

What happened to the bottom photo? The top one looks great, but the bottom one looks very bilious. :lol:
Watch Out. There's A Humphrey About
User avatar
prospero
 
Posts: 10157
Joined: Tue Jun 05, 2007 4:16 pm
Location: Lincolnshire

Re: Handgun

Postby A3DFramer » Thu Feb 04, 2016 3:14 pm

Nice work,
Having spent a few years making displays for commercial premises, I cased a few antique weapons. On one occasion a very good customer, who bought hundreds of displays a year asked me to do a special for a friend. It turned out to be a very nice quality pepperpot pistol, and the client gave permission to copy it for a sizable discount.

I was able to reproduce it in a metallic finished resin, and I delivered the first displays with bullet mould, wad cutters etc, often adding them on to existing orders as was the custom with new work.

One client was a very large wholesale warehouse in Lancashire, the buyer was thrilled with the display saying that she would have no trouble selling it, but a few days later I had a phone call saying that the MD had seen it and being in a particularly bad mood that day, told her to return it. I agreed to credit off the next order but never did because it had sold.

Some weeks later a designer/ project director from the home counties phoned me to say he had problem with a pub interior he had recently finished in Liverpool, described a case with a pepperpot pistol, which had been smashed open to gain access to a seemingly valuable artifact. This designer knew it had to be my work because of the style of glass case and the frame moulding I used to use, it had come from the wholesaler who had first rejected it. All were happy that the replacement went through the same chain of supply, insurance covered special deliveries etc.

There were no complaints from the police as it was explained that the seeming lethal weapon would have broken up on being ripped out of the display, but it later transpired that the thieves had been injured because my construction methods were stronger than those, who tried to copy the products my company made and arrest were made.
A3DFramer
 
Posts: 200
Joined: Fri May 18, 2012 6:51 pm
Location: Shropshire
Location: Shropshire
Organisation: Collectors Cases
Interests: Virtual 3D Model making, Digital Graphics.

Re: Handgun

Postby newie31 » Thu Feb 04, 2016 6:30 pm

Prospero,

it's just the light, I put it by the door and took the photos on my mobile, it's not very flattering but it was just to show the final effect.

Mark
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Re: Handgun

Postby MikeSwannick » Sun Feb 07, 2016 11:19 pm

The sale of imitation firearms is restricted in the UK by the Violent Crimes Reduction Act 2006. Realistic looking replicas can only be sold in the circumstances quoted below:

From 1 October 2007, section 36 Violent Crime Reduction Act 2006 created an offence to manufacture, bring into or cause to be brought into Great Britain, or sell realistic imitation firearms. It also made it an offence to modify an imitation firearm to make it realistic.

Section 37 relates to specific defences: this allows persons in the course of trade or business to import realistic imitation firearms for the purpose of modifying them to make them non-realistic. It also provides various defences if the realistic imitation firearm was available for:

a museum or gallery;
theatrical performances and rehearsals of such performances;
the production of films and television programmes;
the organisation and holding of historical re-enactments; or
crown servants.


Airsoft'ers can buy realistic looking replicas for their pastime provided they are bonafide members of a recognised club. I suspect even they would break the law if they hung up their BB's and chose to have their 'weapon' mounted.
So producing a similar personal presentation in the UK is against the law. I'm not sure I'd like to be the one to test the statute as to whether a persons home constituted a 'gallery' for the purpose of this Act.

I hope this is useful to anyone who may get asked to create something like this.

Nice work by the way. :clap: Is the mottle effect on the mountcard purchased or is that your own handywork?

Mike.
MikeSwannick
 
Posts: 60
Joined: Tue Jan 26, 2016 3:23 pm
Location: Brookenby
Organisation: Game of Frames
Interests: All things zombie. I also do data recovery.

Re: Handgun

Postby prospero » Mon Feb 08, 2016 1:45 pm

MikeSwannick wrote:Nice work by the way. :clap: Is the mottle effect on the mountcard purchased or is that your own handywork?


I do believe that's a suede mountboard. :D
Watch Out. There's A Humphrey About
User avatar
prospero
 
Posts: 10157
Joined: Tue Jun 05, 2007 4:16 pm
Location: Lincolnshire

Re: Handgun

Postby Roboframer » Mon Feb 08, 2016 2:44 pm

Arqadia dark shale I reckon
Back behind the velvet rope, Ladies.

.
User avatar
Roboframer
 
Posts: 10602
Joined: Wed Feb 01, 2006 7:56 pm
Location: Angmering W.Sussex
Organisation: Angmering Framing & Stitches
Interests: Cooking, drawing.

Re: Handgun

Postby newie31 » Mon Feb 08, 2016 7:32 pm

Yes it's suede mount board, not sure but I thought it was Crescent, I'll have to look tomorrow, I use it on all the medals I frame because I think it sets the medals off nicely, I use the dark Blue for Police and Navy medals, the Dark Green for Army and a Blue /Grey one for air Force, I have also used the Red one for some Paratroopers medals.
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Re: Handgun

Postby newie31 » Fri Feb 12, 2016 7:01 pm

I bow to Robo's greater knowledge, Arquadia it is :rock:
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Re: Handgun

Postby DEEPJOY » Sun Feb 14, 2016 11:11 pm

Hi

Is the brass name plate something you purchased in? Any tips on reasonably priced suppliers of these engraved name plates?

Deepjoy
User avatar
DEEPJOY
 
Posts: 504
Joined: Mon Mar 10, 2008 12:06 am
Location: Newcastle-under-Lyme
Organisation: inPicture Framing
Interests: Framing, Photography, Aircooled VW and time to be creative.

Re: Handgun

Postby newie31 » Tue Feb 16, 2016 7:55 am

Hi Deepjoy,

It's actually a chrome plate, it's just the light, I have used brass plates as well. I use a little sports trophy shop in Orpington where I used to live, he still posts them out to me over here. Look in your yellow pages I'm sure there'll be one somewhere near you, they cost me a fiver including the engraving, I don't know if that's a good price or not, but for how it sets the medals/objects off it's worth the money,

Mark
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Re: Handgun

Postby Roboframer » Tue Feb 16, 2016 11:11 pm

I prefer to print these titles myself and put them a little aperture, in this case with a mount slip - VERY finicky but even without the slip, better than one of those engraved plaques IMHO. You can pick the font, text size/colour, paper type/colour - no mail order, it's all there on your 'puter.

I also prefer to leave out apertures around three-dimensional things, these medals are not as deep as the gun of course, but there's just no requirement for apertures. Why did you feel the need for them?
Attachments
Police badge medals 001.JPG
Police badge medals 001.JPG (216.04 KiB) Viewed 14689 times
Back behind the velvet rope, Ladies.

.
User avatar
Roboframer
 
Posts: 10602
Joined: Wed Feb 01, 2006 7:56 pm
Location: Angmering W.Sussex
Organisation: Angmering Framing & Stitches
Interests: Cooking, drawing.

Re: Handgun

Postby DEEPJOY » Wed Feb 17, 2016 10:00 am

Roboframer wrote:I prefer to print these titles myself and put them a little aperture, in this case with a mount slip - VERY finicky but even without the slip, better than one of those engraved plaques IMHO. You can pick the font, text size/colour, paper type/colour - no mail order, it's all there on your 'puter.

I also prefer to leave out apertures around three-dimensional things, these medals are not as deep as the gun of course, but there's just no requirement for apertures. Why did you feel the need for them?



Hi Robo

What type of paper do you use and is your printer an ink jet or laser?
User avatar
DEEPJOY
 
Posts: 504
Joined: Mon Mar 10, 2008 12:06 am
Location: Newcastle-under-Lyme
Organisation: inPicture Framing
Interests: Framing, Photography, Aircooled VW and time to be creative.

Re: Handgun

Postby Roboframer » Wed Feb 17, 2016 1:26 pm

I use our shop copier, so laser and I don't know exactly what sort of paper as we sell all sorts of paper and card on the craft side and when I want any I do a bit of shoplifting. Not that important on something so small really.
Back behind the velvet rope, Ladies.

.
User avatar
Roboframer
 
Posts: 10602
Joined: Wed Feb 01, 2006 7:56 pm
Location: Angmering W.Sussex
Organisation: Angmering Framing & Stitches
Interests: Cooking, drawing.

Re: Handgun

Postby newie31 » Wed Feb 17, 2016 10:58 pm

Roboframer wrote:I prefer to print these titles myself and put them a little aperture, in this case with a mount slip - VERY finicky but even without the slip, better than one of those engraved plaques IMHO. You can pick the font, text size/colour, paper type/colour - no mail order, it's all there on your 'puter.

I also prefer to leave out apertures around three-dimensional things, these medals are not as deep as the gun of course, but there's just no requirement for apertures. Why did you feel the need for them?


The first medals I framed didn't have apertures around them and I thought they looked a bit flat (just personal preference I suppose), I did a set with apertures and hung them up in the studio and everyone who came in with their medals went for that option, so in the end I just went with the apertures, I think the white line just defines them a bit more.

Like these....

JD 005.JPG
JD 005.JPG (132.33 KiB) Viewed 14591 times


aaaaaaaa 076.jpg
aaaaaaaa 076.jpg (472.32 KiB) Viewed 14591 times
newie31
 
Posts: 66
Joined: Sun May 01, 2011 8:20 pm
Location: Dordogne
Organisation: MVN Framing
Interests: Caricature

Re: Handgun

Postby Steve N » Thu Feb 18, 2016 9:35 am

I like a aperture around medals, seems to finish them off well, used to do lipslips (mount slip if you like to call them) as well
Steve CEO GCF (020)
"Just because you seen it on the internet, does not make it true or right" -Abraham Lincoln
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
Steve N
 
Posts: 2211
Joined: Sat Jul 21, 2007 2:32 pm
Location: Bath, Somerset
Location: Bath, in the wild wild west
Organisation: Frontier Picture Frames
Interests: Walking our retired Greyhond,art, falling asleep on sofa in front of the telly

Re: Handgun

Postby Roboframer » Thu Feb 18, 2016 9:43 am

I like an aperture to have a function, like covering the edges of paper and holding it in place but I don't dislike apertures around some things like medals when it suits - I don't think it would suit my arrangement above - would it be one aperture around the lot or several? I'd just find either distracting.


But in the case of a more 3-dimensional thing, like the gun - it's effectively buried and may as well be close framed.

It's interesting that the only thing in my photo with an aperture is the 'nameplate' and in Newie's, it's the only thing without one.
Back behind the velvet rope, Ladies.

.
User avatar
Roboframer
 
Posts: 10602
Joined: Wed Feb 01, 2006 7:56 pm
Location: Angmering W.Sussex
Organisation: Angmering Framing & Stitches
Interests: Cooking, drawing.


Return to The Good, The Bad, And The Ugly




 
Picture Framer's Trade Directory
Picture Framer's Oracle

 
Members Map Header
Members Map
More info
Resources Header
Contact Forum Admin
Directory
How to include an image in your post
Cove Box Designer
Download Designer
General supplies
Glass
Machinery
Mounts/Mountboard
Artists
Conservators
Prints
Software
Tuition
UK Medals
Framers Forum Live!
Support Header
Crimson
White
Green
Violet
Advertise Header
Forum Banner Ads