Page 1 of 1

Framing Competition

Posted: Fri 12 Feb, 2016 2:18 pm
by David
There aren't many framing competitions around but Gunnar has been holding one for the last few years and the finalists are shown at the NEC Spring Fair. The object of the competition is to show what can be done with a Gunnar CMC. This is the 2016 winner, framing a CD, disc or cassette was the theme:
Gunnar Mount Cutting Competition Winner 2016
Gunnar Mount Cutting Competition Winner 2016
ACDC-1Web.jpg (65.07 KiB) Viewed 10451 times
The other entries can be seen on the Gunnar Facebook page https://www.facebook.com/UKGUNNAR/?fref=ts

Re: Framing Competition

Posted: Fri 12 Feb, 2016 4:13 pm
by GeoSpectrum
Would anyone buy it?

Re: Framing Competition

Posted: Fri 12 Feb, 2016 4:20 pm
by Roboframer
Is it done direct from the gunnar software or did you have to import stuff?

Re: Framing Competition

Posted: Fri 12 Feb, 2016 5:07 pm
by chris62
More like a mount cutting competition to me

Re: Framing Competition

Posted: Fri 12 Feb, 2016 5:19 pm
by Roboframer
Go to the top of the class! :roll:
David wrote:The object of the competition is to show what can be done with a Gunnar CMC.

Re: Framing Competition

Posted: Fri 12 Feb, 2016 5:25 pm
by David
I didn't do it, so it's not mine. It was all created in the Gunnar software nothing was imported, some of the elements are standard templates.

It's a competition piece so its not meant for sale, but from personal experience I have sold reproductions but more often individual elements have been incorporated into customer jobs, it's so much easier selling creative stuff if you have examples to show and you don't have to convince anyone that you can frame - as long as they like it that is.

Re: Framing Competition

Posted: Thu 12 May, 2016 11:53 am
by frameartnyc
Image
Hello viewers!
Is this framing is nice to be added for Framing Competition?

Re: Framing Competition

Posted: Fri 20 May, 2016 6:01 pm
by IFGL
I think that particular competition has been and gone, I am sure you could enter it into the next one, assuming it is a recent project?