Deep rebate frame
Posted: Sat 07 Dec, 2019 11:12 pm
I recall someone asking about deep rebates for frames.
I am having to do a very deep rebated frame for a rugby shirt with a cap. I started today so thought i would take a few pics as i go.
I am using R&H A344, a big chunky moulding with a decent rebate anyway. So first i make and pin the frame
When i cut this frame, i cut a 2nd one exactly the same size. This one i run through the bandsaw. I not only remove the rebate, but cut back about 10mm into the frame itself.
I then pin this together and as i have the time, glue and clamp the frames together. If i had less time, i may have used some pocket screws.
So i now have a rebate for the glass, i will use the leftover piece when cutting the 2nd frame (photo 2) to fit to hold the glass in place and have a 2nd rebate for the mountboard with shirt and cap to sit giving me 33mm clearance from the glass
Will update hopefully tomorrow.
Nick
I am having to do a very deep rebated frame for a rugby shirt with a cap. I started today so thought i would take a few pics as i go.
I am using R&H A344, a big chunky moulding with a decent rebate anyway. So first i make and pin the frame
When i cut this frame, i cut a 2nd one exactly the same size. This one i run through the bandsaw. I not only remove the rebate, but cut back about 10mm into the frame itself.
I then pin this together and as i have the time, glue and clamp the frames together. If i had less time, i may have used some pocket screws.
So i now have a rebate for the glass, i will use the leftover piece when cutting the 2nd frame (photo 2) to fit to hold the glass in place and have a 2nd rebate for the mountboard with shirt and cap to sit giving me 33mm clearance from the glass
Will update hopefully tomorrow.
Nick