Not Enough Room For A CMC? No longer an Issue.

Computerised Mount Cutters, Computers, other gadgetry.
Post Reply
JamieGriff93
Posts: 5
Joined: Mon 11 Jan, 2016 12:30 am
Location: Essex
Organisation: TGS Repairs LLP
Interests: Football, Fishing, Computers/Technology, Films, Framing (Of Course)
Location: Essex
Contact:

Not Enough Room For A CMC? No longer an Issue.

Post by JamieGriff93 » Fri 11 Mar, 2016 12:00 pm

Space is no longer an Issue!!

Our latest Valiani installation was in a small gallery who in the past would have been told they do not have the space for a CMC machine of any description.

Thanks to the new wall mounting kit designed by Valiani it is now possible for them to enjoy all of the features and speed that a new CMC machine has to offer.

The pictures below show the final installation of both the Valiani machine pulled forward in an operational position which is quite imposing on the space and also the machine when it is stored against the wall when not in use.

Now is the time to reconsider your space as it might now be possible.

Installation completed by Mark Griffiths and Jamie Griffiths
Attachments
1461897_10153665737358375_675345744_n.jpg
1461897_10153665737358375_675345744_n.jpg (81.17 KiB) Viewed 10220 times
Space taken up when in use
Space taken up when in use
12834908_10153665738438375_1679306130_n.jpg (95.17 KiB) Viewed 10220 times
Valiani CMC Machine in operational position
Valiani CMC Machine in operational position
12825125_10153665739113375_90406743_n.jpg (75.49 KiB) Viewed 10220 times
Jamie Griffiths

Field Service Engineer

TGS Repairs LLP

User avatar
Steve N
Posts: 2471
Joined: Sat 21 Jul, 2007 3:32 pm
Location: Bath, in the wild wild west
Organisation: Frontier Picture Frames
Interests: Walking our retired Greyhond,art, falling asleep on sofa in front of the telly
Location: Bath, Somerset
Contact:

Re: Not Enough Room For A CMC? No longer an Issue.

Post by Steve N » Fri 11 Mar, 2016 2:17 pm

Very neat, looks good :rock:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/

User avatar
GeoSpectrum
Posts: 1714
Joined: Fri 01 Oct, 2010 12:49 pm
Location: Lincolnshire
Organisation: Ashcraft Framing
Interests: Framing, cycling, Family, x-country skiing, wine, art
Location: Gainsborough, Lincolnshire
Contact:

Re: Not Enough Room For A CMC? No longer an Issue.

Post by GeoSpectrum » Fri 11 Mar, 2016 2:30 pm

No wall space either!
Alan Huntley
Ashcraft Framing
Plain wood frames, Inlay/tray frames and painted frames for artists.
http://www.ashcraftframing.co.uk
Twitter: @AshcraftFrames
Our Blog: http://ashcraftframing.wordpress.com/
Doing nothing is a much underrated activity

JamieGriff93
Posts: 5
Joined: Mon 11 Jan, 2016 12:30 am
Location: Essex
Organisation: TGS Repairs LLP
Interests: Football, Fishing, Computers/Technology, Films, Framing (Of Course)
Location: Essex
Contact:

Re: Not Enough Room For A CMC? No longer an Issue.

Post by JamieGriff93 » Fri 11 Mar, 2016 2:51 pm

Hahaha, maybe we will have to start looking for a ceiling mounting kit then.

And thanks Steve, we are very happy with it. :D
Jamie Griffiths

Field Service Engineer

TGS Repairs LLP

Graysalchemy

Re: Not Enough Room For A CMC? No longer an Issue.

Post by Graysalchemy » Fri 11 Mar, 2016 9:01 pm

I can sell you some sky hooks I'd you want, might have a long stand as well somewhere :giggle:

User avatar
GeoSpectrum
Posts: 1714
Joined: Fri 01 Oct, 2010 12:49 pm
Location: Lincolnshire
Organisation: Ashcraft Framing
Interests: Framing, cycling, Family, x-country skiing, wine, art
Location: Gainsborough, Lincolnshire
Contact:

Re: Not Enough Room For A CMC? No longer an Issue.

Post by GeoSpectrum » Fri 11 Mar, 2016 9:02 pm

I bought some mount waits from Lion. very handy.
Alan Huntley
Ashcraft Framing
Plain wood frames, Inlay/tray frames and painted frames for artists.
http://www.ashcraftframing.co.uk
Twitter: @AshcraftFrames
Our Blog: http://ashcraftframing.wordpress.com/
Doing nothing is a much underrated activity

Keith
Posts: 116
Joined: Wed 20 Jul, 2005 1:19 am
Location: Cheltenham, Gloucestershire

Re: Not Enough Room For A CMC? No longer an Issue.

Post by Keith » Thu 24 Mar, 2016 5:52 pm

Hi

Looks Good I could certainly do with this, just a few questions though

What is the minimum ceiling height and width and length required for an Ultra BC? with this bracket

I'm thinking of getting a new machine would this an option or an extra? as the base wont be required.

And if an extra what's the cost (including the bracket) on top of the standard installation cost?

Thanks Keith

CanvasChris
Posts: 622
Joined: Wed 05 Mar, 2008 12:05 am
Location: Brixworth
Organisation: Retired Picture Framerand Printer
Interests: mountain biking & drinking beer.... not necessarily in that order!
Location: Northampton

Re: Not Enough Room For A CMC? No longer an Issue.

Post by CanvasChris » Thu 24 Mar, 2016 7:56 pm

That is great... wonder why it's not been thought of before.

Is it a Valiani gizmo or can any CMC utilise the 'kit'
Canvas, Acrylic, Photographic, Fine Art Printing & Framing
http://www.prophotosolutions.co.uk

JamieGriff93
Posts: 5
Joined: Mon 11 Jan, 2016 12:30 am
Location: Essex
Organisation: TGS Repairs LLP
Interests: Football, Fishing, Computers/Technology, Films, Framing (Of Course)
Location: Essex
Contact:

Re: Not Enough Room For A CMC? No longer an Issue.

Post by JamieGriff93 » Wed 18 May, 2016 12:22 pm

Im not 100% sure on the dimensions of the bracket but if you contact Joe at Simons he will be able to give you the exact dimensions. The stand for both the 120 and 150 BC are the same but if clearance above and below is an issue then the smaller will be more suitable as it hangs off the stand less. Also I believe that the wall mounting kit can replace the stand as like you say there is no need for both.


Chris this stand is made by Valiani so is specific to the, I am unaware of anyone else doing the same thing
Jamie Griffiths

Field Service Engineer

TGS Repairs LLP

wizardint
Posts: 1
Joined: Wed 25 May, 2016 5:55 pm
Location: Mukilteo, WA USA
Organisation: Wizard International, Inc.
Interests: www.wizardint.com

Re: Not Enough Room For A CMC? No longer an Issue.

Post by wizardint » Thu 26 May, 2016 7:40 pm

Hi all! Wizard debuted the Space-Saver™ Retractable Wall Mount at the 2015 West Coast Art & Frame Expo in Las Vegas, NV.

Feel free to watch a video demo here: https://www.youtube.com/watch?v=k4ZH8X5Ngmk

For additional details, please visit our website or contact Framers Corner for UK sales:
Telephone: 01530 516 925
Email: [email protected]

Thank you!

Wizard International, Inc.
http://www.wizardint.com
888.855.3335 (USA)
Attachments
ProductSheet_Space-Saver_Email.pdf
Wizard Space-Saver™ Retractable Wall Mount
(1013.51 KiB) Downloaded 255 times

doogey
Posts: 25
Joined: Mon 10 Aug, 2009 8:55 am
Location: surbiton surrey
Organisation: picture framers
Interests: art

Re: Not Enough Room For A CMC? No longer an Issue.

Post by doogey » Thu 01 Sep, 2016 5:31 pm

the magic that team Griffis produce!!! shame the hammers don't follow!! lol
Dug
Artefact

grahamdown
Posts: 181
Joined: Thu 16 Jun, 2011 12:43 pm
Location: Hollingbourne, Maidstone
Organisation: The Village Framer
Interests: Photography, Mountainbiking

Re: Not Enough Room For A CMC? No longer an Issue.

Post by grahamdown » Fri 02 Sep, 2016 11:24 am

I have my Gunnar wall mounted and it works fine.

Post Reply