high end photographic print

Conservation Issues
Post Reply
stcstc

high end photographic print

Post by stcstc »

I have been asked to frame a high end photographic print. could be worth 10K or so

Having not done anything like this before. i am a little nervous

The print is already mounted. so i have to frame.

what other precautions options should i be offering my client apart from museum glass etc.

should i be doing things like sealing the glass mount package together etc?
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: high end photographic print

Post by prospero »

Unless the picture is going to an area that is plagued by the little black flies, then internal sealing isn't strictly necessary. I do it routinely because not only are there shoals of the little critters around here in the summer but I find it makes assembly easier. :)
Watch Out. There's A Humphrey About
stcstc

Re: high end photographic print

Post by stcstc »

cheers prospero

i have just never framed anything at this level before, and kinda a little nervous that i miss something important
User avatar
David
Posts: 404
Joined: Sat 08 Sep, 2007 10:24 pm
Location: Silverstone
Organisation: Silverstone Framing
Interests: Photography, Motor Racing, Military
Location: Silverstone

Re: high end photographic print

Post by David »

I know how you feel, I had a customer who brought in a 6' cybachrome print from the US, several thousand dollars worth and cybachrome has a very high gloss which will mark if you even look at it.

My advice, don't let liquids any where near it especially water, if you use a spray cleaner make sure the photo is covered and or a long way away, atomised droplets can hang in the air and land on the photo some time after being used especially if there is also someone else working in the workshop. Don't even have any liquids on the same bench including tea and coffee. To remove dust don't touch the surface use a vacuum cleaner held off the surface. If you have to touch the print use cotton gloves.
Oh and hold your breath if you are leaning over the picture and don't cough over it.

Check the mounting to see that it has been done properly, conservation mountboard, adhesives and T hinges.

Good luck, it's only a picture.

David.
Nigel Nobody

Re: high end photographic print

Post by Nigel Nobody »

Use unbuffered mats/mounts! If you can't get unbuffered, you can use unbuffered tissue under the edge of the mat/mount to separate the mat/mount from the photo (courtesy of Hugh Phibbs)
8 ply mat/mount would be very nice!
User avatar
gesso
Posts: 572
Joined: Mon 03 Dec, 2007 10:01 am
Location: GL544DX
Organisation: The Gilders Studio
Interests: see above

Re: high end photographic print

Post by gesso »

What's your customers budget?
are they prepared to spend upto 10% of the value of the print on the framing?
Mark Fisher
www.thegildersstudio.co.uk (Now Closed)
tel 07513605550
GL544DX
stcstc

Re: high end photographic print

Post by stcstc »

they spent 55% of cost of print on framing

the print was actually mounted when it arrived, with cotton rag boards
User avatar
iantheframer
Posts: 236
Joined: Mon 21 Jan, 2008 2:59 pm
Location: central portugal
Organisation: is not my greatest talent!
Interests: photography

Re: high end photographic print

Post by iantheframer »

stcstc wrote:I have been asked to frame a high end photographic print. could be worth 10K or so
stcstc wrote:they spent 55% of cost of print on framing
5.5 grand on framing :shock:

I thought I charged a lot

Seriously though if it is already mounted just frame it as you would any other thing using good quality materials and I would seal the glass too.
Ian
stcstc

Re: high end photographic print

Post by stcstc »

sorry it turned out the print was worth about 350 euros Doh,
Post Reply