Tigers Head

Share your CMC experiences.
Or seek help and advice
Post Reply
Posts: 116
Joined: Wed 20 Jul, 2005 1:19 am
Location: Cheltenham, Gloucestershire

Tigers Head

Post by Keith » Mon 17 May, 2010 6:42 pm

Hi All. (and John!!!)

Please find attached a embroidery of a tigers head I would like to try and get a cut from. I've tried in Corel Draw as per Johns Australian project but without success.
Do you think it's possible to get a cut from this photo (does the black background cause a problem) and if so please let me know how it's done. :head:

Thanks Keith
Tigers Head 2.jpg
Tigers Head 2.jpg (86.82 KiB) Viewed 3626 times

User avatar
Posts: 1556
Joined: Thu 05 Jun, 2003 6:50 pm
Location: Cornwall
Organisation: Merlin Mounts
Interests: Aviation

Re: Tigers Head

Post by Merlin » Mon 17 May, 2010 7:06 pm

Hi Keith.

your design in PLT format is uploaded into the Design section, because .PLT formats are not allowed here.

Please see

Hope it is what you require. If not then come on back

Post Reply