Page 1 of 1

Tigers Head

Posted: Mon 17 May, 2010 5:42 pm
by Keith
Hi All. (and John!!!)

Please find attached a embroidery of a tigers head I would like to try and get a cut from. I've tried in Corel Draw as per Johns Australian project but without success.
Do you think it's possible to get a cut from this photo (does the black background cause a problem) and if so please let me know how it's done. :head:

Thanks Keith

Re: Tigers Head

Posted: Mon 17 May, 2010 6:06 pm
by Merlin
Hi Keith.

your design in PLT format is uploaded into the Design section, because .PLT formats are not allowed here.

Please see
http://theframersforum.com/viewtopic.php?f=27&t=4855

Hope it is what you require. If not then come on back