Page 1 of 1

Add an additional moulding

Posted: Thu 01 Mar, 2018 6:59 pm
by Nicole
Is it possible to add additional mouldings such as where they are stacked or maybe a stretcher bar and a frame. We have added the stretcher bars manually in the moulding list as stock as they were not in the moulding ID list (Wessex).

Re: Add an additional moulding

Posted: Fri 02 Mar, 2018 2:30 pm
by JohnMcafee
EstLite has a column for Moulding Location (see screenshot below)
Mouldings.png
Mouldings.png (77.76 KiB) Viewed 3984 times
However, if you are referring to stacked frames, they are easily accommodated by use of the plus sign. Up to 5 mouldings can be "stacked" in order (Innermost first)
Main.png
Main.png (44.51 KiB) Viewed 3984 times
Two mouldings are stacked in the example above, Moulding 22 is the outer frame and PW1 the inner.

Hope this helps.

Re: Add an additional moulding

Posted: Fri 02 Mar, 2018 8:41 pm
by Nicole
Thank you we were halfway there just didn't know about the plu s sign. We'll give it a go and post again if needs be.