help on moulding recognition please

Ask for and give assistance
Post Reply
Trinity
Posts: 632
Joined: Wed 06 Jan, 2010 9:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:
Contact Trinity

help on moulding recognition please

Post by Trinity » Fri 30 Nov, 2018 3:17 pm

IMG_1309[1].JPG
IMG_1309[1].JPG (1.25 MiB) Viewed 583 times
IMG_1310[1].JPG
IMG_1310[1].JPG (1.17 MiB) Viewed 583 times
This is a beige coloured moulding, 31mm across the face and 18mm deep. It has a grain type of effect quite delicate. Does anyone recognise please or possibly suggest somewhere near.

Thank you in anticipation.
Do not be afraid of strangers, for thereby many have entertained angels unawares.
Top
BaBaZa
Posts: 194
Joined: Tue 21 Jun, 2005 2:03 pm
Location: Nottingham
Organisation: http://www.mainlinemouldings.com
Interests: Pubs
Location: Nottingham
Contact:
Contact BaBaZa

Re: help on moulding recognition please

Post by BaBaZa » Fri 30 Nov, 2018 3:28 pm

https://mainlinemouldings.com/index.php ... D=POL-4018
Ricky @ Mainline Mouldings Ltd

Twitter #MainlinePolcore
Top
Trinity
Posts: 632
Joined: Wed 06 Jan, 2010 9:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:
Contact Trinity

Re: help on moulding recognition please

Post by Trinity » Fri 30 Nov, 2018 4:26 pm

Thanks very much - i didn't realise how naff my photos were, but that does the job perfectly.
Do not be afraid of strangers, for thereby many have entertained angels unawares.
Top
Trinity
Posts: 632
Joined: Wed 06 Jan, 2010 9:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:
Contact Trinity

Re: help on moulding recognition please

Post by Trinity » Fri 30 Nov, 2018 4:36 pm

Lost your book, still find it easier to flick through pages!

Thanks again
Keith
Do not be afraid of strangers, for thereby many have entertained angels unawares.
Top
BaBaZa
Posts: 194
Joined: Tue 21 Jun, 2005 2:03 pm
Location: Nottingham
Organisation: http://www.mainlinemouldings.com
Interests: Pubs
Location: Nottingham
Contact:
Contact BaBaZa

Re: help on moulding recognition please

Post by BaBaZa » Mon 03 Dec, 2018 1:27 pm

I've sent a catalogue in post today Keith
Ricky @ Mainline Mouldings Ltd

Twitter #MainlinePolcore
Top
User avatar
featurepiece
Posts: 958
Joined: Thu 31 Jan, 2013 9:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:
Contact featurepiece

Re: help on moulding recognition please

Post by featurepiece » Mon 03 Dec, 2018 9:42 pm

Hi, Simon's do something like that in their Econ range.

ECON/0020

https://www.djsimons.co.uk/index.php?ro ... con&page=2
Top
[email protected]
Posts: 10
Joined: Thu 06 Dec, 2018 12:45 pm
Location: Birmingham
Organisation: www.lionpic.co.uk
Interests: Picture framing, mounting & laminating, picture hanging systems, framing workshop equipment
Location: Birmingham, United Kingdom
Contact:
Contact [email protected]

Re: help on moulding recognition please

Post by [email protected] » Thu 06 Dec, 2018 1:08 pm

Looks similar to 'Floripa' https://www.lionpic.co.uk/p/35797/21mm- ... e-Moulding
Warren @ Lion Picture Framing Supplies
www.lionpic.co.uk/picture-frame-moulding/
www.lionpic.co.uk
Top
Ed209
Posts: 389
Joined: Sun 05 Mar, 2017 9:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:
Contact Ed209

Re: help on moulding recognition please

Post by Ed209 » Thu 06 Dec, 2018 4:50 pm

That Floripa was popular with my customers but not good to pin as they tend to follow the hard grain and come out the back!


Sent from my iPhone using Tapatalk
Top
Post Reply

Return to “Help!”