Today is the day where everything is giving me problems. I'll start with the Keencut first, then move onto the next machine.
When placing mountboard against the stop edge (ruler side) it keeps moving underneath, and I'm noticing a few mms of movement in the end component. I've got a feeling something needs tightening...
Keencut Ultimat Futura
-
- Posts: 159
- Joined: Wed 18 Jul, 2012 8:00 pm
- Location: Stroud
- Organisation: Peckham Pictures (closed)
- Interests: Framing, Art, Photography
- Location: Stroud
- Contact:
Keencut Ultimat Futura
- Attachments
-
- MB gap.jpg (56.49 KiB) Viewed 8446 times
- IFGL
- Posts: 3087
- Joined: Sun 06 May, 2012 5:27 pm
- Location: Sheffield UK
- Organisation: Inframe Gallery Ltd
- Interests: Films ,music and art, my wife and kids are pretty cool too.
- Location: Sheffield
- Contact:
Re: Keencut Ultimat Futura
You seem to have a small pink arrow stuck under the stop edge, try removing it, it might help!
Re: Keencut Ultimat Futura
Methinks something wants jiggling a bit.
Watch Out. There's A Humphrey About
-
- Posts: 90
- Joined: Tue 29 Apr, 2014 11:00 pm
- Location: Harrogate
- Organisation: Tutto Framing
- Interests: Photography, walking, travel
Re: Keencut Ultimat Futura
Hi Louise, I'd give Keencut a call. From experience, you can usually get a technical bod to talk it through with you over the phone
-
- Posts: 23
- Joined: Tue 08 Sep, 2009 7:24 am
- Location: East Midlands
- Organisation: Stuffed Pepper
- Interests: All manner of craftiness, of course including picture framing!
Re: Keencut Ultimat Futura
Hi Louise,
Did you get it sorted? If not try carefully peeling up the right hand end of the label which is just above where your arrow is and you should see a flat topped Allen screw hidden underneath it. I think it may have come loose, tighten it and I think the problem should disappear. By the way make sure there is no debris underneath it before you tighten the screw.
Pep
Did you get it sorted? If not try carefully peeling up the right hand end of the label which is just above where your arrow is and you should see a flat topped Allen screw hidden underneath it. I think it may have come loose, tighten it and I think the problem should disappear. By the way make sure there is no debris underneath it before you tighten the screw.
Pep
-
- Posts: 159
- Joined: Wed 18 Jul, 2012 8:00 pm
- Location: Stroud
- Organisation: Peckham Pictures (closed)
- Interests: Framing, Art, Photography
- Location: Stroud
- Contact:
Re: Keencut Ultimat Futura
Brilliant, thanks Pepper that's the ticket. All sorted. In the December madness this was forgotten about, but it's good to get it sorted.
Also my names actually Simon, Louise was my old business partner. Don't think I can change it on here though.
Also my names actually Simon, Louise was my old business partner. Don't think I can change it on here though.