Moulding ID please

Get help and framing advice from the framing community
Post Reply
Trinity
Posts: 688
Joined: Wed 06 Jan, 2010 8:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:

Moulding ID please

Post by Trinity »

F131-warm-gold-tan.jpg
F131-warm-gold-tan.jpg (105.57 KiB) Viewed 3811 times
section.png
section.png (5.32 KiB) Viewed 3810 times

Can anyone help with a source for this moulding please, it's off the Loxley Colour website and is one of a range.70 wide x 38 deep
Thanks
Keith
Do not be afraid of strangers, for thereby many have entertained angels unawares.
kuduframes
Posts: 185
Joined: Thu 28 Apr, 2011 6:09 pm
Location: Ewshot, Hampshire
Organisation: Kudu Frames
Interests: Art, photography
Contact:

Re: Moulding ID please

Post by kuduframes »

Hi, it looks like Lion L2286, one of their 'opus' range
Trinity
Posts: 688
Joined: Wed 06 Jan, 2010 8:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:

Re: Moulding ID please

Post by Trinity »

F131-mottled-bronze-black.jpg
F131-mottled-bronze-black.jpg (109.5 KiB) Viewed 3773 times
F131-black-tan.jpg
F131-black-tan.jpg (99.05 KiB) Viewed 3773 times
Could well be, these others dont quite look the same but it might be just the light - samples methinks?
Do not be afraid of strangers, for thereby many have entertained angels unawares.
kuduframes
Posts: 185
Joined: Thu 28 Apr, 2011 6:09 pm
Location: Ewshot, Hampshire
Organisation: Kudu Frames
Interests: Art, photography
Contact:

Re: Moulding ID please

Post by kuduframes »

methinks they are L2288 and L2284 respectively, I also think it is the light, samples it is....cheers
User avatar
IFGL
Posts: 3087
Joined: Sun 06 May, 2012 5:27 pm
Location: Sheffield UK
Organisation: Inframe Gallery Ltd
Interests: Films ,music and art, my wife and kids are pretty cool too.
Location: Sheffield
Contact:

Re: Moulding ID please

Post by IFGL »

All of the frames from Loxley I have seen so far have been polly, this must be their high end range.
kuduframes
Posts: 185
Joined: Thu 28 Apr, 2011 6:09 pm
Location: Ewshot, Hampshire
Organisation: Kudu Frames
Interests: Art, photography
Contact:

Re: Moulding ID please

Post by kuduframes »

come to think of it, I'm pretty sure Mainline do the same range
BaBaZa
Posts: 210
Joined: Tue 21 Jun, 2005 1:03 pm
Location: Nottingham
Organisation: http://www.mainlinemouldings.com
Interests: Pubs
Location: Nottingham
Contact:

Re: Moulding ID please

Post by BaBaZa »

Ricky @ Mainline Mouldings Ltd

Twitter #MainlinePolcore
Post Reply