Underpinner make model please

Get help and framing advice from the framing community
Post Reply
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Underpinner make model please

Post by Ed209 »

IMG_0695.JPG
IMG_0695.JPG (2.7 MiB) Viewed 4186 times

Sent from my iPhone using Tapatalk
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Underpinner make more photos

Post by Ed209 »

IMG_0696.JPG
IMG_0696.JPG (2.54 MiB) Viewed 4190 times
IMG_0697.JPG
IMG_0697.JPG (2.37 MiB) Viewed 4190 times

Sent from my iPhone using Tapatalk
User avatar
Mark Thornton
Posts: 241
Joined: Thu 08 Feb, 2007 4:00 pm
Location: Yorkshire
Organisation: Underpinner Spares
Interests: Red wine - lots and lots of it.
Location: Snaith, East Riding of Yorkshire
Contact:

Re: Underpinner make model please

Post by Mark Thornton »

Looks like a Gielle, not sure which model.

Mark
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Re: Underpinner make model please

Post by Ed209 »

Thank you, It very much indeed looks like a Gielle, This is all new to me have bought a retiring framers set up which included the underpinner, Morso F, Keencut Ultimate future
Managed to download manuals for the last two, Gielle is probably older version of F106...
Not your average framer
Posts: 11014
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Underpinner make model please

Post by Not your average framer »

They are built like tanks. It should last you a life time!
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Re: Underpinner make model please

Post by Ed209 »

Hello could I please have some info Re : Cassese underpinner I have just run out of the 7mm V's that were in there when i got it but had some bigger ones but they would not go in then realised there was a metal bar with a 7 on it that can be removed to accommodate the bigger V's I have some 10mm & 15mm.
My question is do you use a different bar with the relevant No. stamped on it? which could be a problem as I only have one with a 7 on it.
can you still get parts?
The machine is the one in the photo at the start of this thread.
Thanks Paul
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Re: Underpinner make model please

Post by Ed209 »

Sorry got a bit muddled there think the model is a Gielle
Post Reply