Adjusting forward movement on old pre-F Morso frame cutter

Get help and framing advice from the framing community
Post Reply
noyesnomaybe
Posts: 1
Joined: Thu 04 May, 2017 6:59 pm
Location: Stockholm
Organisation: Patrik
Interests: photography

Adjusting forward movement on old pre-F Morso frame cutter

Post by noyesnomaybe »

Hi there,
I recently acquired an old foot-operated Morso guillotine (from 1947...) and am having trouble with adjusting the trim cut and as a result I'm stuck with having to add a distance between the frame piece and the fence, which works ok but is not optimal. I have found instructions on how to adjust the forward movement for the Morso F, but it seems that my machine is slightly different from an F.
Does anyone have on of these old machines and if so could give advice on how to adjust the knives in its forward-most position?

Many thanks,
Patrik
Post Reply