boxing title belt

Get help and framing advice from the framing community
Post Reply
The Common Framer
Posts: 154
Joined: Mon 10 Nov, 2014 9:24 am
Location: Woking
Organisation: The Horsell Framing Company
Interests: Photography, Boats

boxing title belt

Post by The Common Framer »

hiall

Need some advice. Please see attached photo. Customer wants to mount this belt BUT - it must be removable.

Thought about velcro but no good. Any ideas?

Much appreciated.

Matt
Attachments
belt.JPG
belt.JPG (571.89 KiB) Viewed 3708 times
Jamesnkr

Re: boxing title belt

Post by Jamesnkr »

I was going to suggest using the press studs/buckles at each end. But it would sag. So requires some support from the middle. So you're going to have to do *something*. Said he helpfully...

So what about something that is more presentation case like, so that the belt is displayed on a tilted shelf? i.e. so that it's lying down, but it's angled so that it can hang on the wall.
The Common Framer
Posts: 154
Joined: Mon 10 Nov, 2014 9:24 am
Location: Woking
Organisation: The Horsell Framing Company
Interests: Photography, Boats

Re: boxing title belt

Post by The Common Framer »

hi

\i like that idea.A small shelf would do it!

thanks

MAtt
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Re: boxing title belt

Post by pramsay13 »

I'm sure there was an article in Art and Framing Today magazine a few months back.
I'll see if I can find it.
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: boxing title belt

Post by Steve N »

what does the back of the belt look like
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
The Common Framer
Posts: 154
Joined: Mon 10 Nov, 2014 9:24 am
Location: Woking
Organisation: The Horsell Framing Company
Interests: Photography, Boats

Re: boxing title belt

Post by The Common Framer »

Hi all

All sorted - will [post pic when finally completed. I did put in a small "shelf".

cheers for your help
The Common Framer
Posts: 154
Joined: Mon 10 Nov, 2014 9:24 am
Location: Woking
Organisation: The Horsell Framing Company
Interests: Photography, Boats

Re: boxing title belt

Post by The Common Framer »

Hi

Sorry - promised to post a pic when done: see attached.

I built a small shelf out of gold moulding. By luck there was also a threaded hole in the top of the centre piece of the belt that allowed me to put a bolt through the boards at the back and secure.
Attachments
belt1.jpg
belt1.jpg (33.81 KiB) Viewed 3436 times
Post Reply