Morso problem!

Get help and framing advice from the framing community
Post Reply
Badger
Posts: 2
Joined: Fri 23 Jun, 2017 5:56 pm
Location: surrey
Organisation: happy framer
Interests: framing anything!

Morso problem!

Post by Badger »

Hello Framers of the world, long time reader first time poster!
I am looking for a solution to a problem with my bottom knife block, I have about 2mm clearance from the face of the blade and the block itself which is causing unsightly unclean cuts at the base of the frames I cut, but I am unable to/nervous about how I correct this problem, also I need to move the foot pedal about 20mm to the right as its rubbing on the inside of the machine.

Many thanks!
tebbles
Posts: 35
Joined: Tue 14 Jul, 2015 10:18 pm
Location: galway
Organisation: the frame shop
Interests: music, framing

Re: Morso problem!

Post by tebbles »

At the back of the morso there is a long metal bar with a bolt, you can adjust the height of the blades by twisting the bolt.
User avatar
Mark Thornton
Posts: 241
Joined: Thu 08 Feb, 2007 4:00 pm
Location: Yorkshire
Organisation: Underpinner Spares
Interests: Red wine - lots and lots of it.
Location: Snaith, East Riding of Yorkshire
Contact:

Re: Morso problem!

Post by Mark Thornton »

Use this to adjust your bottom blades: https://www.lionpic.co.uk/p/9423/Long-T ... Morso--5mm

Image

Mark
https://www.underpinner-spares.co.uk Framing equipment spare parts - Easy online ordering
Badger
Posts: 2
Joined: Fri 23 Jun, 2017 5:56 pm
Location: surrey
Organisation: happy framer
Interests: framing anything!

Re: Morso problem!

Post by Badger »

With kind thanks Mark, its greatly appreciated!
Post Reply