Taking photos of finished frames

Get help and framing advice from the framing community
Post Reply
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Taking photos of finished frames

Post by Ed209 »

Has anyone got any tips on the best way of photographing finished framing jobs.
Am just starting out putting a web site together and need some decent pictures of work we have done so far but seem to get a lot of reflection/shadow tried various times of day different rooms lighting etc. I have a basic bridge camera and tripod, could also use ipad/iphone
Many thanks in advance
Paul


Sent from my iPhone using Tapatalk
User avatar
Rainbow
Posts: 891
Joined: Tue 23 Jun, 2015 8:51 am
Location: See my name, I'm somewhere over it
Organisation: Picture sales and framing
Interests: varied

Re: Taking photos of finished frames

Post by Rainbow »

I don't have any special equipment as I haven't got any interest in photography, so I just use a compact automatic camera. I lay the picture flat on a table so that there's a plain ceiling above and no reflections from around the room. I photograph the picture from on-high, making sure my own reflection isn't in the glass. This results in the picture being a trapezoid shape, but I then correct the shape using Photoshop so that the picture looks straight-on.
Jayvee
Posts: 166
Joined: Sun 03 Apr, 2011 9:13 pm
Location: Abergavenny
Organisation: Framed By John
Interests: Framing, Football, Cricket, Movies
Location: Abergavenny
Contact:

Re: Taking photos of finished frames

Post by Jayvee »

Easiest way - take the photo before you fit the glass... :)

:rock:
huntvambo
Posts: 279
Joined: Tue 28 Jul, 2009 4:31 pm
Location: Worcestershire
Organisation: Framed
Interests: Music, cycling, drinking, The Sensational Alex Harvey Band
Contact:

Re: Taking photos of finished frames

Post by huntvambo »

If it's only the odd one now and again you want to photograph, loosely assemble without the glass, take your photo and then finish properly.
User avatar
JohnMcafee
Posts: 1145
Joined: Sun 10 Oct, 2010 9:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights
Location: Belfast
Contact:

Re: Taking photos of finished frames

Post by JohnMcafee »

I like Rainbow's solution.

But if you don't have any photoshop skills or specialist lighting, then try to remember to photograph the frame without glass, before final assembly. The fiddly part is to position the camera so as to keep the sides of the frame parallel, though.
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
Jamesnkr

Re: Taking photos of finished frames

Post by Jamesnkr »

JohnMcafee wrote: The fiddly part is to position the camera so as to keep the sides of the frame parallel, though.
So you need to place the picture as far away as possible and zoom in on it.

If you're taking photos of glazed pictures, I have a pretty good setup. You need to have the illumination at shallower than 45 degrees to avoid reflections, and you need it to come from both sides, and you need to shoot through something black.

Having recently done a fair chunk of research into getting this done as cheaply as possible, I have just bought a DSLR camera. Added to it I have a wireless flash trigger - a Yongnuo 603, about £30 - and two flash guns - Yongnuo 560ii, about £50 each. Yongnuo are a Chinese brand and come from eBay or Amazon and are cheap yet highly regarded in the online camera forum world. Also two tripods and white umbrellas for diffusing the flash, about £40 total from Amazon. And then a large black sheet that I poke the lens of the camera through. The black sheet has to be big enough to cover everything within 45 degrees of the picture, both left-right and up-down. With judicious use of Photoshop (or Gimp, which is free) you don't need to worry about getting everything absolutely parallel. You're going to want to edit and crop the photo anyway, it's easier to straighten it up on the computer than in real life!
Attachments
Capture.JPG
Capture.JPG (64.22 KiB) Viewed 5948 times
poliopete
Posts: 798
Joined: Mon 04 Apr, 2016 7:13 am
Location: The Wash
Organisation: Annie Lou Fine Framing
Interests: Caring for my wife, Picture Framing and Natural History

Re: Taking photos of finished frames

Post by poliopete »

Thanks James

That seems easy enough :giggle:

But on reflection I will stick to Rainbow's method :clap:

Peter
Not your average framer
Posts: 11013
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Taking photos of finished frames

Post by Not your average framer »

I do as Rainbow and preferably without the glass. My digital camera came out of the ark and does not give the best results, it's only 2.1 megapixels, so I guess you can tell that it's not up to much. I will get something more modern sometime!
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
User avatar
Rainbow
Posts: 891
Joined: Tue 23 Jun, 2015 8:51 am
Location: See my name, I'm somewhere over it
Organisation: Picture sales and framing
Interests: varied

Re: Taking photos of finished frames

Post by Rainbow »

Phew, at last I've posted something useful! :D
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Re: Taking photos of finished frames

Post by pramsay13 »

I lay the finished frame down on the ground and I stand over it and take the photo without the flash.
Sometimes I use software for lens correction if the frame looks bowed and to add a background / shadow etc.
If the day is too bright I don't bother as my reflection will be too obvious.
Jamesnkr

Re: Taking photos of finished frames

Post by Jamesnkr »

Pete, I often take photographs of things that are already framed, that I didn't frame and I will not unframe. Otherwise, yes, without the glass is obviously the easiest!

Going back to JohnMcafee's point about getting the sides parallel, I think I misunderstood him. I was thinking that if you use a camera on wide angle zoom you end up with distortion around the edges of the picture, so a straight edge begins to look curved. So if you have a zoom camera, don't use it on wide angle zoom.

If I didn't need to photograph glazed pictures I would just use my iPhone 6S which takes superb pictures. The only thing it won't do is to activate remote flashguns, hence my need for a DSLR. On the iPhone there's also a very good free app called VSCO. This is a very high-powered photo editing app. It allows you to straighten up those edges, amend exposure and contrast, crop etc. etc. I find it very useful indeed.
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: Taking photos of finished frames

Post by prospero »

The photos I take of frames aren't really publication standard but for best results with basic amateur kit....

Get the lens as parallel to the plane of the picture as possible. Use a tripod if you can.

Don't get too close. Focal length 50mm or greater and zoom in. Too close and straight lines will bend.

Diffused daylight is the best lighting if you don't have a lighting rig.
Watch Out. There's A Humphrey About
Post Reply