Hollow or flat ground morso blades,Pros and Cons?
-
- Posts: 230
- Joined: Fri 27 Feb, 2015 7:02 pm
- Location: Chesham, Bucks.
- Organisation: FrameCraft
- Interests: Picture Framing.
Hollow or flat ground morso blades,Pros and Cons?
Hi guys, I found an old post on here from 2005 regarding this I just wondered if anyone has any views, advice, input etc. I dont actually know which method mine are ground by but will ask after this conversation! Mine are always great when they first come back but dont seem to last very long!
Re: Hollow or flat ground morso blades,Pros and Cons?
Morso specs emphasise hollow ground and that's good enough for me.
Watch Out. There's A Humphrey About
- StevenG
- Posts: 1149
- Joined: Thu 31 Jan, 2013 8:01 am
- Location: Tyrone, N.Ireland
- Organisation: Featurepiece Frames
- Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
- Contact:
Re: Hollow or flat ground morso blades,Pros and Cons?
I can only speak from personal experience..... Hollow ground is the only way, I've had them done flat & that left me with nothing but problems, nearly put me out of business - I couldn't get a decent cut/join. On different sets of blades too btw. So, yes hollow ground I've found is the best way