stopping cracks

Get help and framing advice from the framing community
Post Reply
Compomouldings
Posts: 55
Joined: Wed 07 May, 2014 6:53 pm
Location: Wickford
Organisation: Compo mouldings ltd
Interests: Framing

stopping cracks

Post by Compomouldings »

Hi
I have had a few customers unable to join the profile attached successfully.
Once joined (with underpinning) and the glue has set there is still movement which then causes a hairline crack once the frame is coloured.

The moulding is about 2" wide

Any advice please

Thanks
Ross
Attachments
b5.jpg
b5.jpg (27.05 KiB) Viewed 2357 times
poliopete
Posts: 798
Joined: Mon 04 Apr, 2016 7:13 am
Location: The Wash
Organisation: Annie Lou Fine Framing
Interests: Caring for my wife, Picture Framing and Natural History

Re: stopping cracks

Post by poliopete »

Hi Ross

If I had your issue i would be inclined to try;

Apply glue then clamp as tight as pos' in a band or tourneque type clamp then underpin and leave in the clamp untill the glue is cured.

The position, and how you stack, as well as the size of the vnails must be considered.

Good luck.

Peter
User avatar
prospero
Posts: 11492
Joined: Tue 05 Jun, 2007 4:16 pm
Location: Lincolnshire

Re: stopping cracks

Post by prospero »

It's all to do with the moisture content in the wood.

If the moulding has been in a cold environment (unheated warehouse/shed) it will have a higher moisture content than
a heated place. Particularly this time of year. Wood shrinks/expands across the grain direction. The wider the moulding
the more movement.
It's a good idea to bring the moulding into a warm room and leave it for several days before cutting. That way it will normalise
and won't shrink after joining. Bit of a pain, but it's the only way to be sure.
Watch Out. There's A Humphrey About
ARworx
Posts: 24
Joined: Sat 27 Jan, 2018 3:39 am
Location: Jordan
Organisation: ARworx
Interests: Art, wodwork, mosaic, reading

Re: stopping cracks

Post by ARworx »

I agree all recommendations above and i will add that for a moulding in this size i always like to add a biscuit joint done with a thin router bit, beside keeping the band clamp until glue dry.

Hope this will solve your problem.
Post Reply