Hello there
I had someone in today that wanted a shape cut out of mountboard to replace their existing torn whiskey bottle holder thing. I said I don't have CMC but I might know somebody who would.
So..... is it possible for someone to replicate this exact shape - it needs to support a very expensive bottle (a bottle that will never be drank), the outer box has a see-through front.
Anyone?
Can anyone cut this
- StevenG
- Posts: 1149
- Joined: Thu 31 Jan, 2013 8:01 am
- Location: Tyrone, N.Ireland
- Organisation: Featurepiece Frames
- Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
- Contact:
Can anyone cut this
- Attachments
-
- whiskey.jpg (2.07 MiB) Viewed 2185 times
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: Can anyone cut this
If you can't get anybody near you to do it, post it to me and I will do it, we are doing it all the time as can be seen here
https://www.designerpicturemounts.com/d ... asses.html
Don't know about the colour though
https://www.designerpicturemounts.com/d ... asses.html
Don't know about the colour though
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
-
- Posts: 159
- Joined: Wed 18 Jul, 2012 8:00 pm
- Location: Stroud
- Organisation: Peckham Pictures (closed)
- Interests: Framing, Art, Photography
- Location: Stroud
- Contact:
Re: Can anyone cut this
Could you get in touch with the distillery and see if they have a spare of the piece of packaging?
- StevenG
- Posts: 1149
- Joined: Thu 31 Jan, 2013 8:01 am
- Location: Tyrone, N.Ireland
- Organisation: Featurepiece Frames
- Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
- Contact:
Re: Can anyone cut this
louisesimon wrote:Could you get in touch with the distillery and see if they have a spare of the piece of packaging?
I did ask that question actually - but apparently it was a limited edition run made for an event. Only 250 were made (or so I'm told )