Hi
Need a deep tray frame in black - preferably open grain - rebate needs to be 52mm minimum.
Thanks!
deep tray frame
-
- Posts: 154
- Joined: Mon 10 Nov, 2014 9:24 am
- Location: Woking
- Organisation: The Horsell Framing Company
- Interests: Photography, Boats
-
- Posts: 185
- Joined: Thu 28 Apr, 2011 6:09 pm
- Location: Ewshot, Hampshire
- Organisation: Kudu Frames
- Interests: Art, photography
- Contact:
Re: deep tray frame
Good luck with your search, recently tried to find one without any success, Lion have introduced a new BLOC range which is 48 mm rebate.
-
- Posts: 11019
- Joined: Sat 25 Mar, 2006 8:40 pm
- Location: Devon, U.K.
- Organisation: The Dartmoor Gallery
- Interests: Lost causes, saving and restoring old things, learning something every day
- Location: Glorious Devon
Re: deep tray frame
Or fabricate the moulding you want using a moulding and a flat spacer. Looking at my paper Rose & Hollis catalogue, the distance from the outer edge to the inside of the rebate for A104 measures 52mm from the paper catalogue. Turned on it's side with a flat specer added into the rebate, this may be a workable solution to your requirements.
Don't forget to ask Rose & Hollis to check this dimension before just going ahead and placing an order. Hopefully, problem solved!
I would add that I have had bad experiences with larger obeche tray moulding where I have encountered, poor quality wood in the wrong place, while trying to produce larger tray frames and as a result have spent far too much of wastage which is only fit for the dumpster. As a result, I hardly ever use tray frame mouldings, but make them up using my normal stock mouldings and spacers.
It often gives me the option not to use obeche, if I don't wish to!
Don't forget to ask Rose & Hollis to check this dimension before just going ahead and placing an order. Hopefully, problem solved!
I would add that I have had bad experiences with larger obeche tray moulding where I have encountered, poor quality wood in the wrong place, while trying to produce larger tray frames and as a result have spent far too much of wastage which is only fit for the dumpster. As a result, I hardly ever use tray frame mouldings, but make them up using my normal stock mouldings and spacers.
It often gives me the option not to use obeche, if I don't wish to!
Mark Lacey
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
- Steve N
- Posts: 2992
- Joined: Sat 21 Jul, 2007 2:32 pm
- Location: Somewhere Staple Hill Bristol
- Organisation: Frontier Picture Frames ltd
- Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
- Location: Now in Bristol
- Contact:
Re: deep tray frame
You could use D & J Simons http://www.djsimons.co.uk/index.php?rou ... bec%2F0105
it's 61mm deep, cut and join upside down, pop a bit of 3mm MDF in the bottom , then paint black, job done
We use this a lot, (customer picked up 16 yesterday) we make them regular for the same customer, he pops in his own plywood backing , we just cut and join upside down, then use a brad nailer to cross nail through the sides at the top to make a nice strong joint, fill and sand, nice earner
it's 61mm deep, cut and join upside down, pop a bit of 3mm MDF in the bottom , then paint black, job done
We use this a lot, (customer picked up 16 yesterday) we make them regular for the same customer, he pops in his own plywood backing , we just cut and join upside down, then use a brad nailer to cross nail through the sides at the top to make a nice strong joint, fill and sand, nice earner
Steve CEO GCF (020)
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Believed in Time Travel since 2035
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
- GeoSpectrum
- Posts: 2151
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Re: deep tray frame
^^^ Same here. Works a treat. I sell them online as well.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
-
- Posts: 154
- Joined: Mon 10 Nov, 2014 9:24 am
- Location: Woking
- Organisation: The Horsell Framing Company
- Interests: Photography, Boats
Re: deep tray frame
Thanks all
The fabrication looks like a plan! Many thanks
The fabrication looks like a plan! Many thanks