help on moulding recognition please

Get help and framing advice from the framing community
Post Reply
Trinity
Posts: 688
Joined: Wed 06 Jan, 2010 8:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:

help on moulding recognition please

Post by Trinity »

IMG_1309[1].JPG
IMG_1309[1].JPG (1.25 MiB) Viewed 3402 times
IMG_1310[1].JPG
IMG_1310[1].JPG (1.17 MiB) Viewed 3402 times
This is a beige coloured moulding, 31mm across the face and 18mm deep. It has a grain type of effect quite delicate. Does anyone recognise please or possibly suggest somewhere near.

Thank you in anticipation.
Do not be afraid of strangers, for thereby many have entertained angels unawares.
BaBaZa
Posts: 210
Joined: Tue 21 Jun, 2005 1:03 pm
Location: Nottingham
Organisation: http://www.mainlinemouldings.com
Interests: Pubs
Location: Nottingham
Contact:

Re: help on moulding recognition please

Post by BaBaZa »

Ricky @ Mainline Mouldings Ltd

Twitter #MainlinePolcore
Trinity
Posts: 688
Joined: Wed 06 Jan, 2010 8:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:

Re: help on moulding recognition please

Post by Trinity »

Thanks very much - i didn't realise how naff my photos were, but that does the job perfectly.
Do not be afraid of strangers, for thereby many have entertained angels unawares.
Trinity
Posts: 688
Joined: Wed 06 Jan, 2010 8:01 pm
Location: Yorkshire England
Organisation: Trinity Framing
Interests: Classic Tractors, Honda Blackbird, Eunos, anything with an engine
Contact:

Re: help on moulding recognition please

Post by Trinity »

Lost your book, still find it easier to flick through pages!

Thanks again
Keith
Do not be afraid of strangers, for thereby many have entertained angels unawares.
BaBaZa
Posts: 210
Joined: Tue 21 Jun, 2005 1:03 pm
Location: Nottingham
Organisation: http://www.mainlinemouldings.com
Interests: Pubs
Location: Nottingham
Contact:

Re: help on moulding recognition please

Post by BaBaZa »

I've sent a catalogue in post today Keith
Ricky @ Mainline Mouldings Ltd

Twitter #MainlinePolcore
User avatar
StevenG
Posts: 1147
Joined: Thu 31 Jan, 2013 8:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:

Re: help on moulding recognition please

Post by StevenG »

Hi, Simon's do something like that in their Econ range.

ECON/0020

https://www.djsimons.co.uk/index.php?ro ... con&page=2
Warren@Lionpic
Posts: 11
Joined: Thu 06 Dec, 2018 11:45 am
Location: Birmingham
Organisation: www.lionpic.co.uk
Interests: Picture framing, mounting & laminating, picture hanging systems, framing workshop equipment
Location: Birmingham, United Kingdom
Contact:

Re: help on moulding recognition please

Post by Warren@Lionpic »

Warren @ Lion Picture Framing Supplies
www.lionpic.co.uk/picture-frame-moulding/
www.lionpic.co.uk
Ed209
Posts: 437
Joined: Sun 05 Mar, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing
Contact:

Re: help on moulding recognition please

Post by Ed209 »

That Floripa was popular with my customers but not good to pin as they tend to follow the hard grain and come out the back!


Sent from my iPhone using Tapatalk
Post Reply