Page 1 of 1
help on moulding recognition please
Posted: Fri 30 Nov, 2018 2:17 pm
by Trinity
![IMG_1309[1].JPG](./download/file.php?id=11081&sid=0a258d8d1439be7025d4dd7f1299d2b1)
- IMG_1309[1].JPG (1.25 MiB) Viewed 3447 times
![IMG_1310[1].JPG](./download/file.php?id=11080&sid=0a258d8d1439be7025d4dd7f1299d2b1)
- IMG_1310[1].JPG (1.17 MiB) Viewed 3447 times
This is a beige coloured moulding, 31mm across the face and 18mm deep. It has a grain type of effect quite delicate. Does anyone recognise please or possibly suggest somewhere near.
Thank you in anticipation.
Re: help on moulding recognition please
Posted: Fri 30 Nov, 2018 2:28 pm
by BaBaZa
Re: help on moulding recognition please
Posted: Fri 30 Nov, 2018 3:26 pm
by Trinity
Thanks very much - i didn't realise how naff my photos were, but that does the job perfectly.
Re: help on moulding recognition please
Posted: Fri 30 Nov, 2018 3:36 pm
by Trinity
Lost your book, still find it easier to flick through pages!
Thanks again
Keith
Re: help on moulding recognition please
Posted: Mon 03 Dec, 2018 12:27 pm
by BaBaZa
I've sent a catalogue in post today Keith
Re: help on moulding recognition please
Posted: Mon 03 Dec, 2018 8:42 pm
by StevenG
Hi, Simon's do something like that in their Econ range.
ECON/0020
https://www.djsimons.co.uk/index.php?ro ... con&page=2
Re: help on moulding recognition please
Posted: Thu 06 Dec, 2018 12:08 pm
by Warren@Lionpic
Re: help on moulding recognition please
Posted: Thu 06 Dec, 2018 3:50 pm
by Ed209
That Floripa was popular with my customers but not good to pin as they tend to follow the hard grain and come out the back!
Sent from my iPhone using Tapatalk