double sided frame

Ask for and give assistance

double sided frame

Postby Ed209 » Thu Dec 20, 2018 10:36 am

Just had a enquiry re: double sided Map that they would like framed so it can be turned over when required to display the other side. is there such a thing as a double sided moulding specifically for this purpose or has anyone done anything similar and made something up? How would you hang it?
Ed209
 
Posts: 345
Joined: Sun Mar 05, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing

Gunnar Computerised Mountcutters

Re: double sided frame

Postby Steve N » Thu Dec 20, 2018 1:20 pm

I just used the search 'Thingy' on the forum and it came up with loads of pages regarding double sided frames, here is the latest
https://www.theframersforum.com/viewtop ... me#p129835

I normally use two mounts, back to back, with the artwork/map between them, then the two bits of glass,then depending on the moulding, is it deep enough to take all the above, if so, finish off as normal, if not deep enough, use two frames back to back, take up any free space using spacers/fillets to fill the space, glue the two frames together.
Steve CEO GCF (020)
"Just because you seen it on the internet, does not make it true or right" -Abraham Lincoln
Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
Steve N
 
Posts: 2245
Joined: Sat Jul 21, 2007 2:32 pm
Location: Bath, Somerset
Location: Bath, in the wild wild west
Organisation: Frontier Picture Frames
Interests: Walking our retired Greyhond,art, falling asleep on sofa in front of the telly

Re: double sided frame

Postby Jim Miller » Thu Dec 20, 2018 7:57 pm

For this I might use a Recto-Verso Platform Mount, which holds the paper's edges without the need of any adhesive in direct contact. If you have a computerized mat cutter (Oh, sorry...computerised mount cutter :giggle: ) it is quite easy to construct. Just be sure to make the Platform opening about x1.005 larger than the item, and the assembly loose enough to allow normal expansion/contraction

Drawing-PLATFORM Recto-Verso Profile 6-10-18.jpg
Drawing-PLATFORM Recto-Verso Profile 6-10-18.jpg (331.82 KiB) Viewed 302 times
Jim Miller
 
Posts: 15
Joined: Thu Dec 20, 2018 11:20 am
Location: Pickerington, Ohio USA
Organisation: James Miller
Interests: Framing objects, Calligraphy, Educating/mentoring framers, technical writing/framing articles & books

Re: double sided frame

Postby Ed209 » Thu Jan 03, 2019 12:07 am

Must say a Recto Verso sounds pretty uncomfortable and should probably be only attempted on a empty stomach [emoji26] It now turns out she wants two different mouldings no Mount so going to sandwich double sided map between two sheets of 2mm float, fix self additive 6mm black plastic spacers to each sheet of glass then fix the mouldings together with screws neatly spaced as a feature on one side. 18mm black grain moulding the other a gold leaf 17mm but they mate together ok and the spacers & glass perfect fit between the two.
It’s going to hang from a picture rail so hanging cord/wire easily sorted.


!-!
Ed209
 
Posts: 345
Joined: Sun Mar 05, 2017 8:22 pm
Location: Birchington-on-Sea, Kent
Organisation: Birchington Framing Centre
Interests: Guitar, woodwork, cycling Singing


Return to Help!



cron

 
Picture Framer's Trade Directory
Picture Framer's Oracle

 
Members Map Header
Members Map
More info
Resources Header
Contact Forum Admin
Directory
How to include an image in your post
Cove Box Designer
Download Designer
General supplies
Glass
Machinery
Mounts/Mountboard
Artists
Conservators
Prints
Software
Tuition
UK Medals
Framers Forum Live!
Support Header
Crimson
White
Green
Violet
Advertise Header
Forum Banner Ads