tray frame

Get help and framing advice from the framing community
Post Reply
jon buck
Posts: 351
Joined: Sun 02 Dec, 2007 11:17 am
Location: Winforton
Organisation: Forge Framing Studio
Interests: golf music reading drinking wine and eating fresh food
Contact:

tray frame

Post by jon buck »

I'm struggling to locate some deep tray frame. About 6cm depth . in a bare wood. Any info gratefully received.

Many thanks


Jon
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: tray frame

Post by Justintime »

Rose and Hollis A45 Obeche, upside down with an obeche fillet would give you about 56mm? Or make up the A45 upside down then infill with 3mm mdf?
Justin George GCF(APF)
Insta: georgetheframer
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: tray frame

Post by Justintime »

Lion also have L2642 which is even deeper.
Justin George GCF(APF)
Insta: georgetheframer
Post Reply