Bolting mitered corners
- GeoSpectrum
- Posts: 2151
- Joined: Fri 01 Oct, 2010 11:49 am
- Location: Lincolnshire
- Organisation: Ashcraft Framing
- Interests: Family, x-country skiing, wine, art, Jazz
- Location: Gainsborough, Lincolnshire
- Contact:
Bolting mitered corners
Does anyone know anything about this type of fitting? Its looks interesting, well, to me anyway.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
Re: Bolting mitered corners
I've seen these used before on big frames that have to be assembled/dismantled on site.
Never used them myself.
Never used them myself.
Watch Out. There's A Humphrey About
-
- Posts: 1359
- Joined: Tue 12 Jun, 2012 6:05 pm
- Location: West Wales
- Organisation: https://www.dermotmcardle.co.uk/
- Interests: Making picture frames
- Contact:
Re: Bolting mitered corners
I think if you Google around for - kitchen work top clamps - you'll find those or something similar.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
https://www.instagram.com/dermotmcardle/
-
- Posts: 1880
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Bolting mitered corners
I've only seen this used before on a hardwood bed frame with dowels.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer
-
- Posts: 11018
- Joined: Sat 25 Mar, 2006 8:40 pm
- Location: Devon, U.K.
- Organisation: The Dartmoor Gallery
- Interests: Lost causes, saving and restoring old things, learning something every day
- Location: Glorious Devon
Re: Bolting mitered corners
Some very well known and highly reputable framers use these to assemble really large frames and this also include joining lengths of moulding together end to end. This technique is not limited to just one on the kitchen work top joiners per joint, if the moulding is wide enough is may be beneficial to even have two, or even three, if there is a lot of weight needing to be kept in check. I have seen pictures of this technique being used for very large frames somewhere on the internet, I assumed that it was probably on this forum, but it was a long time ago, so I'm not completely sure all this time later.
The example that I saw was a 30 ft long canvas for an exhibition and the canvas needed to be stretched on site and it was very impressive. It was much to long to fit in to any available vehicles, so everything was assembled on site. I assume that it was quite challenging to do this, as there were some many joins in the frame, include 90 degree joins and the tolerances on each cut length would have been very demanding as the tolerances would add up from one joint to another. I wonder is the framers workshop had enough space to do a trial assembly to check everything fitted together really well before taking the whole thing to the exhibition.
The example that I saw was a 30 ft long canvas for an exhibition and the canvas needed to be stretched on site and it was very impressive. It was much to long to fit in to any available vehicles, so everything was assembled on site. I assume that it was quite challenging to do this, as there were some many joins in the frame, include 90 degree joins and the tolerances on each cut length would have been very demanding as the tolerances would add up from one joint to another. I wonder is the framers workshop had enough space to do a trial assembly to check everything fitted together really well before taking the whole thing to the exhibition.
Mark Lacey
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
-
- Posts: 1297
- Joined: Thu 23 Sep, 2004 8:31 pm
- Location: Detroit, Michigan USA
- Organisation: minoxy, LLC
- Interests: non-fiction knowledge
- Contact:
Re: Bolting mitered corners
Here is another version that has been around in the US for at least 60 years. It can be tightened in compression as well as expansion directions.
--amazon.com/Rockler-Tite-Joint-Fasteners/dp/B001DT17DG--
--amazon.com/Rockler-Tite-Joint-Fasteners/dp/B001DT17DG--
Jerome Feig CPF®
http://www.minoxy.com
http://www.minoxy.com