Keencut Framing Masterclass
- KeencutTechSupport
- Posts: 18
- Joined: Wed 16 Dec, 2020 1:09 pm
- Location: Corby
- Organisation: Keencut
- Interests: Manufacturing the worlds finest cutting machines.
Keencut Framing Masterclass
We have launched a series of videos featuring David Wilkie GCF showing how to get the best from the Ultimat Futura and the Excalibur 5000. There is something in there for those new to framing, fully fledged framers and those aspiring to be one. It is easy to dip in & out, plus it is full of tips, tricks and ideas. You can see it on our website here https://bit.ly/3jtNEQE and we would love to get your feed back.
-
- Posts: 19
- Joined: Wed 15 Sep, 2021 9:31 pm
- Location: Dublin
- Organisation: PC framing
- Interests: framing & photography
Re: Keencut Framing Masterclass
Yes Great videos I stayed up late last night watching all of them. I have the ultimat gold by keencut. it would be nice to do a video on alignment of the bottom fence as my machine seems to be out a wee bit.
-
- Posts: 29
- Joined: Fri 27 Sep, 2019 9:43 pm
- Location: East Neuk of Fife
- Organisation: Frameology St Monans
- Interests: Golf, Photography & cooking, then eating what I cook! (Ok I see the problem now!)
Re: Keencut Framing Masterclass
I’m working my way through them so many thanks for these as I’m finding them very useful.
Not sure it would be worth a video on its own but I recently changed the glass cutting wheel on my Excalibur and found it quite tricky and was unsure if I was doing it right. Might be good to combine & show how the experts change and setup the wheel and blades on both Excalibur and Ultimat.
Thanks again, Allan
Not sure it would be worth a video on its own but I recently changed the glass cutting wheel on my Excalibur and found it quite tricky and was unsure if I was doing it right. Might be good to combine & show how the experts change and setup the wheel and blades on both Excalibur and Ultimat.
Thanks again, Allan
- KeencutTechSupport
- Posts: 18
- Joined: Wed 16 Dec, 2020 1:09 pm
- Location: Corby
- Organisation: Keencut
- Interests: Manufacturing the worlds finest cutting machines.
Re: Keencut Framing Masterclass
Thanks for the feedback, it's good to know you are finding them interesting and useful.
Allan,
We are in the process of making short video clips on all sorts of things and we will get one sorted on changing the glass cutting wheel. It is a straight forward process but there are a couple of things that make it easier to do, we'll get it underway.
Swany,
Setting up the bottom fence and the whole issue of checking and adjusting the squareness of the machine (applies to original Ultimat, Ultimat Gold and Futura) is another now on the list, watch this space as they say.
Any other 'short vid' requests and we will add them to the list also.
Allan,
We are in the process of making short video clips on all sorts of things and we will get one sorted on changing the glass cutting wheel. It is a straight forward process but there are a couple of things that make it easier to do, we'll get it underway.
Swany,
Setting up the bottom fence and the whole issue of checking and adjusting the squareness of the machine (applies to original Ultimat, Ultimat Gold and Futura) is another now on the list, watch this space as they say.
Any other 'short vid' requests and we will add them to the list also.