Mountboard moulding
-
- Posts: 52
- Joined: Wed 30 Nov, 2022 5:43 pm
- Location: Yorkshire
- Organisation: Avenues Picture Framing
- Interests: Classic cars
Mountboard moulding
A customer asked for a frame similar to attached photo, black frame with a deep rebate, there is a smaller moulding to edge the mountboard and step the picture back; it looks like the smaller moulding has a step for the mountboard (but I could be wrong), does anyone know if this style of moulding can be purchased anywhere?
- YPF
- Posts: 452
- Joined: Mon 07 Sep, 2009 11:25 am
- Location: Worcester
- Organisation: Your Picture Framer
- Interests: Dog agility with my 2 cocker cross spaniels and a bit of woodturning. Recently taken up the ukulele!
- Location: Worcester
- Contact:
Re: Mountboard moulding
Looks like a slip fitted to a mount with a reverse cut bevel. You should be able to get them from most suppliers - if you can’t find a black one get a plain wood and paint it
Re: Mountboard moulding
That's what I would term a 'fillet'.
Many suppliers make complimentary fillets that match a moulding (as appears to be the case there).
LJ/Arcadia did a lot but not sure what they do atm as I hardly never buy finished moulding.
You can always paint a plain wood one as YPF says. A black one wouldn't be difficult.
Rose&Hollis do a few plain profiles.
Many suppliers make complimentary fillets that match a moulding (as appears to be the case there).
LJ/Arcadia did a lot but not sure what they do atm as I hardly never buy finished moulding.
You can always paint a plain wood one as YPF says. A black one wouldn't be difficult.
Rose&Hollis do a few plain profiles.
Watch Out. There's A Humphrey About
-
- Posts: 1879
- Joined: Sat 26 Sep, 2015 8:48 am
- Location: West Wales
- Organisation: George The Framer LLP
- Interests: Gardening, design, electronic music, good food and beverages.
- Contact:
Re: Mountboard moulding
Yes, the fillet has a step for the reverse bevelled mountboard to butt up against. you will need to pinwheel some 1400 board underneath the mountboard to make it sit level.
Justin George GCF(APF)
Insta: georgetheframer
Insta: georgetheframer