Just starting out!

Say hello, and tell us a little about yourself.

Just starting out!

Postby nwframer » Tue Jun 19, 2018 11:18 pm

Hello All!
Hope you are all well
A photographer here getting into framing.
Been doing photography for many years and suddenly got the opportunity to buy a complete set up of kit for framing.
So picking up the following this weekend..
Morso F Cutter
Cassese CS79 underpinner
Logan Elite Mount cutter plus oval cutters etc
Huge amount of other tools and mouldings, mount boards et etc... too much to list
There's plenty of stuff to practice on and learn.
Looking to print plenty of new prints for our home and frame them whilst learning, do some courses and see where it takes us?
So much variety and opportunity in framing and there's lots to explore, learn and develop into different fields.
I am looking forward to reading through the forum and seeing all the wonderful projects you all do.
All the best
Andy
nwframer
 
Posts: 6
Joined: Tue Jun 19, 2018 6:11 pm
Location: northwest uk
Organisation: northwest framing
Interests: photography framing

EstLite Frame Pricing Software

Re: Just starting out!

Postby prospero » Wed Jun 20, 2018 8:07 am

Welcome Andy. :D
Watch Out. There's A Humphrey About
User avatar
prospero
 
Posts: 9930
Joined: Tue Jun 05, 2007 5:16 pm
Location: Lincolnshire

Re: Just starting out!

Postby JohnMcafee » Wed Jun 20, 2018 11:08 am

Welcome aboard, Andy.
"A little learning is a dangerous thing"

(Also known as John, the current forum administrator)
User avatar
JohnMcafee
 
Posts: 1037
Joined: Sun Oct 10, 2010 10:58 am
Location: Belfast
Organisation: Scenes
Interests: Picture Framing
Putting the world to rights

Re: Just starting out!

Postby Not your average framer » Wed Jun 20, 2018 1:54 pm

Hi Andy,

Nice to have you with us. A good first move is to let some suppliers know that you are there and get some catalogues and price list, just so that you get to understand what things cost. There will be a learning curve and you will probably have some question, but the forum is a good place to ask those questions, so feel free to do so when you are ready. A lot of us on the forum started out as newbies and are now those who are helping today's newbies with expert advice. A great place to learn, grow and make friends. Enjoy!
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
Not your average framer
 
Posts: 7570
Joined: Sat Mar 25, 2006 9:40 pm
Location: Glorious Devon
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day

Re: Just starting out!

Postby David McCormack » Wed Jun 20, 2018 3:07 pm

Welcome to the FF :D
"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
User avatar
David McCormack
 
Posts: 1308
Joined: Tue Aug 02, 2011 11:14 am
Location: Cumbria
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!

Re: Just starting out!

Postby featurepiece » Thu Jun 21, 2018 11:19 am

Hello & welcome :)
User avatar
featurepiece
 
Posts: 879
Joined: Thu Jan 31, 2013 9:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things

Re: Just starting out!

Postby nwframer » Mon Jun 25, 2018 9:09 pm

Thanks for all the comments everyone, got all the kit now and set up, now to figure it all out and start practicing!
Got a crash course on a few basics but probably best looking for a course nearby if possible?
We are in the northwest just below the lakes on the Fylde coast, always great t0o meet fellow friendly framers nearby.
Thanks again
All the best.
nwframer
 
Posts: 6
Joined: Tue Jun 19, 2018 6:11 pm
Location: northwest uk
Organisation: northwest framing
Interests: photography framing

Re: Just starting out!

Postby red » Wed Jul 11, 2018 9:09 am

welcome

I bought my morso last summer from a studio in south lakes their framer
had retired and they could not get a replacement, they asked me-living
in east Manchester would I be interested in the job! a bit of a daily commute!
with this in mind I imagine there is a market opening for someone
good luck
red
 
Posts: 91
Joined: Sat May 14, 2016 9:30 am
Location: manchester
Organisation: none
Interests: woodwork


Return to Introductions




 
Picture Framer's Trade Directory
Picture Framer's Oracle

 
Members Map Header
Members Map
More info
Resources Header
Contact Forum Admin
Directory
How to include an image in your post
Cove Box Designer
Download Designer
General supplies
Glass
Machinery
Mounts/Mountboard
Artists
Conservators
Prints
Software
Tuition
UK Medals
Framers Forum Live!
Support Header
Crimson
White
Green
Violet
Advertise Header
Forum Banner Ads