I have a valuable artwork which is signed on the back, The customer wants it in a box frame.
The artwork is round so "Invisible" corners are out, it cannot be mounted or pinned in place so anyone have any suggestions how I can fix it in place?
It is quite a bumpy artwork too!
Martin
Valuble Artwork
Re: Valuble Artwork
https://www.lionpic.co.uk/infostore/get ... 43b57a67b3
Or use pass-through hinges. Top tip (from my conservator) when using pass-through hinges, cut them in a piece of 400 micron card and then attach the card to mountboard.
Or use pass-through hinges. Top tip (from my conservator) when using pass-through hinges, cut them in a piece of 400 micron card and then attach the card to mountboard.