USA Picure Framing Magazine - August issue
- Keith Hewitt
- Posts: 1276
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
USA Picure Framing Magazine - August issue
I have 4 spare hard copies of the August issue
If anyone would like one,- just tell me your address and I will post a copy to you
But to be fair, if you are one who got the July issue, this offer is intended for anybody who has not seen the mag before
If anyone would like one,- just tell me your address and I will post a copy to you
But to be fair, if you are one who got the July issue, this offer is intended for anybody who has not seen the mag before
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
- Keith Hewitt
- Posts: 1276
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: USA Picure Framing Magazine - August issue
One gone, 3 left
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
-
- Posts: 252
- Joined: Sat 12 Mar, 2011 4:22 pm
- Location: United Kingdom
- Organisation: Anything Framed
- Interests: Custom Framing, Hand Finishes and Multi Aperture Mounts.
- Location: Peterborough
- Contact:
Re: USA Picure Framing Magazine - August issue
I would love a copy, please? I'll pm my address.
Anything Framed
- Keith Hewitt
- Posts: 1276
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: USA Picure Framing Magazine - August issue
2 more gone 1 left
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
-
- Posts: 252
- Joined: Sat 12 Mar, 2011 4:22 pm
- Location: United Kingdom
- Organisation: Anything Framed
- Interests: Custom Framing, Hand Finishes and Multi Aperture Mounts.
- Location: Peterborough
- Contact:
Re: USA Picure Framing Magazine - August issue
The magazine received, look forward to reading it.
Many thanks
Many thanks
Anything Framed
-
- Posts: 37
- Joined: Sun 29 Jan, 2017 1:25 pm
- Location: Somerset
- Organisation: Folly framing
- Interests: Framing, fabrics and philosophy
Re: USA Picure Framing Magazine - August issue
Thanks so much! Really enjoyed reading this today.
-
- Posts: 47
- Joined: Fri 19 Sep, 2014 7:25 pm
- Location: Essex
- Organisation: Studios
- Interests: Classic car restoration
Re: USA Picure Framing Magazine - August issue
Hi Keith - any left? Regards Parm
- Keith Hewitt
- Posts: 1276
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: USA Picure Framing Magazine - August issue
One left send me a PM ( Private Message ) with your address
Or email me direct if that's easier for you
Or email me direct if that's easier for you
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
- Keith Hewitt
- Posts: 1276
- Joined: Mon 28 Jun, 2004 9:49 am
- Location: BOLLINGTON - Macclesfield England
- Organisation: www.keithhewitt.co.uk
- Interests: Badminton, golf, gym, and exploring new places.
- Contact:
Re: USA Picure Framing Magazine - August issue
All gone now.
Parm offered to refund the postage - not necessary
I've been in the wonderful world of framing now since 1980 - so now 37 years
I consider myself to have been very fortunate as I was able to travel the world introducing COLOURMOUNT into 80 odd countries, up to 2007.
I'm now looking after the introduction of MUNKEN Mount Boards worldwide.
http://www.arcticpaper.com/en/Home/Munk ... ard-Range/
I have made many framing friends overseas through the years and now am often asked when are you coming to see us again.
And a few who come to UK stop by. Only next week John Ranes is on a visit from USA
For those of you who don't know him - Fletcher demonstrator at frame shows, Lecturer at Bologna and Las Vegas, Journalist for PFM & A&FT and owner of The Frame Workshop in Appleton, Wisconsin USA.
On these travels I've had numerous hilarious experiences, usually in countries where English is not so well understood.
I seen things in frame shops that would give UK elf and safely a heart attack.
I'm now at that stage in my life where I'm glad to be able put back something into the industry that has given me so many interesting and good experiences
So Parm, and anyone else who asks for a copy of PFM - I'm quite happy to pay the postage.
PFM are sending me a few mags each month so when the next parcel arrives I will make a post
Parm offered to refund the postage - not necessary
I've been in the wonderful world of framing now since 1980 - so now 37 years
I consider myself to have been very fortunate as I was able to travel the world introducing COLOURMOUNT into 80 odd countries, up to 2007.
I'm now looking after the introduction of MUNKEN Mount Boards worldwide.
http://www.arcticpaper.com/en/Home/Munk ... ard-Range/
I have made many framing friends overseas through the years and now am often asked when are you coming to see us again.
And a few who come to UK stop by. Only next week John Ranes is on a visit from USA
For those of you who don't know him - Fletcher demonstrator at frame shows, Lecturer at Bologna and Las Vegas, Journalist for PFM & A&FT and owner of The Frame Workshop in Appleton, Wisconsin USA.
On these travels I've had numerous hilarious experiences, usually in countries where English is not so well understood.
I seen things in frame shops that would give UK elf and safely a heart attack.
I'm now at that stage in my life where I'm glad to be able put back something into the industry that has given me so many interesting and good experiences
So Parm, and anyone else who asks for a copy of PFM - I'm quite happy to pay the postage.
PFM are sending me a few mags each month so when the next parcel arrives I will make a post
Keith Hewitt
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
I have visited distributors and framers in 90 countries - no two are the same.
https://www.youtube.com/watch?v=4XtrrWooYdg
-
- Posts: 47
- Joined: Fri 19 Sep, 2014 7:25 pm
- Location: Essex
- Organisation: Studios
- Interests: Classic car restoration
Re: USA Picure Framing Magazine - August issue
Hello Keith, magazine received, many thanks.
Parm
Parm