Dust Extractor Advise

Discuss Picture Framing topics.

PLEASE USE THE HELP SECTION
WHEN SEEKING OR OFFERING HELP!
Post Reply
4x90.com
Posts: 66
Joined: Thu 04 Jun, 2015 4:14 pm
Location: Malvern , Worcestershire
Organisation: www.4x90.com
Interests: Contract Framing

Dust Extractor Advise

Post by 4x90.com »

Looking for advise on a good dust extractor for a Cassese 996 Saw

Thank you
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Dust Extractor Advise

Post by vintage frames »

That's a big machine so you're going to need a big extractor. As always, the best advice is to buy a machine one step up from what you need.
I use a reasonably heavy duty extractor that is better described as a chip extractor. It clears all the main cutting dust but if you want to filter out all the very fine dust then you would need a high volume extractor.
One idea is to site the extractor in a separate room or contain it in a chamber such as a cheap plastic greenhouse. Then all the fine dust is contained and removed from the workshop.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
Post Reply