Dust Extractor Advise
Posted: Tue 30 Jan, 2018 2:08 pm
Looking for advise on a good dust extractor for a Cassese 996 Saw
Thank you
Thank you
That's a big machine so you're going to need a big extractor. As always, the best advice is to buy a machine one step up from what you need.
I use a reasonably heavy duty extractor that is better described as a chip extractor. It clears all the main cutting dust but if you want to filter out all the very fine dust then you would need a high volume extractor.
One idea is to site the extractor in a separate room or contain it in a chamber such as a cheap plastic greenhouse. Then all the fine dust is contained and removed from the workshop.