Traditional framing in Uganda

Discuss Picture Framing topics.

PLEASE USE THE HELP SECTION
WHEN SEEKING OR OFFERING HELP!
Post Reply
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Traditional framing in Uganda

Post by pramsay13 »

I'm taking a year out with the family and we're staying in Uganda volunteering in a local community centre.

There is a carpentry workshop and they are keen to learn picture framing but they only have very traditional hand tools so I'm looking for tips.

They have to plane the wood by hand, carve the rebate, measure with a tape measure, mark mitres with a square tool, cut with a cross cut saw or hack saw, and use nails in the corners.

The problems I've found so far are:
wood varies in thickness so I have to cut a v and make sure I am joining those corners together
it is hard to cut accurate 45 degree angles on top and completely vertical down the moulding
it is hard to join mitres using nails

Any advice or tips welcome.
Not your average framer
Posts: 11014
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Traditional framing in Uganda

Post by Not your average framer »

Before the Morso came along a shooting board and a wood plane was a common way of cleaning up a mitre to a correct angle and a good finish. Maybe this is also a good way of accomplishing mitres for picture framing within your current setting in Uganda.

https://www.youtube.com/watch?v=-Ypbvcxb-8M

https://www.youtube.com/watch?v=gUrfzc4hai0

https://www.youtube.com/watch?v=n2yZuylIB1o
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
Not your average framer
Posts: 11014
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Traditional framing in Uganda

Post by Not your average framer »

Are you planning to make some of the tools that you require by hand, while you are out there? Be careful about buying tools in local stores as much of what is likely to be available could well be poor quality far eastern imports and cutting irons, chisels and the like may not be using adequate quality tool steel.

Are you already out in Uganda, or still in the UK? Alternatively do you have anyone in the UK, who can look for suitable older secondhand tools and arrange to get them out to you?

Cutting the rebate will be much easier with a rebate plane and you can make one of those yourself using an older chisel, probably the older the better, so it will have been produced using really good quality tool steel. Here's a video of how to make a chisel plane for cutting rebates:

https://www.youtube.com/watch?v=yTuOtmlRhAI

BTW, May I recommend that you have a look through some of the other Youtube videos by Paul Sellers, you may find a few more of these worth checking out.
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Re: Traditional framing in Uganda

Post by David McCormack »

This is a really smart way of joining a mitre with splines and glue. The spline are just the thickness of a saw kerf, all done by hand.

What an adventure pramsay13 :D I hope you can get a good internet connection and keep us up to date with your progress :D

"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Traditional framing in Uganda

Post by vintage frames »

Sounds like some of the stuff that comes out of my work-shop. Now if I had a big industrial moulding mill then all my mouldings would be straight, accurate and faultless. But I don't. So out goes the underpinner. I did once have a small planer/thicknesser but it made such a racket that I was no longer allowed to use it in a domestic setting, and that's in the middle of the countryside here.
I think you need to go back to basics now and to the days when picture-framers were true craftsmen who had never heard of a Morso or an underpinner. Why don't you make a simple mitre-box, such as the type you can buy in any DIY store. Then make a simple shooting board jig as has been suggested by NYAF. At good bottle of Titebond 3 is your friend; use it and a simple band clamp to join up the frame, then nail it secure the next day.
It's how they used to make frames not so long ago, and I wouldn't say they were too bad at it either.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
User avatar
David McCormack
Posts: 1442
Joined: Tue 02 Aug, 2011 10:14 am
Location: South Lakes
Organisation: Framing
Interests: Cycling, walking, darkroom photography and laughing a lot!
Location: Cumbria
Contact:

Re: Traditional framing in Uganda

Post by David McCormack »

Here's how he made that corner sample in the above video.

"You know, there's a right and wrong way to do everything!"
Oliver Hardy.
https://www.instagram.com/davidaustinmccormack/
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Re: Traditional framing in Uganda

Post by pramsay13 »

Thanks for the posts everyone.
Unfortunately the internet isn't great so it will take me a few days to get through the YouTube videos so I won't be able to feed back immediately.
If you are on social media I am posting occasional updates.
Not your average framer
Posts: 11014
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Traditional framing in Uganda

Post by Not your average framer »

I have quite a reasonable collection of old wooden bodied planes some fully restored, some waiting for restoration and some which are not complete, but are still useful as a source of materials, or spare part for my other planes. I don't know how many of you have ever used a wooden bodied plane, but my first experience of them was a schoolboy in the 1960's during woodwork classes.

I did not learn very much about them at that time, but I learnt to use a wood plane, before I ever handled a metal bodied plane and never felt any reservations about using wooden bodied planes. It was in fact many years later that I learnt that schools used wooden bodied plane, because unlike metal bodied planes, they tend to survive better when schoolboys knock them off the bench onto a hard floor.

All that aside, they are a pleasure to work with, especially when they are planes that you have bought and restored them yourself. I biased anyway, but maybe wooden bodied planes would make good sense in Uganda and perhaps the Ugandans would enjoy making their own personal planes as well.

As you may have already guessed, I've learnt quite a lot from craftsmen like Paul Sellers via Youtube and can thoughly recommend traling through Youtube looking for old school craftsmen, who are willing to teach us things that are hard to learn by any other means. I think that this thread is a great one and I'm looking forward to learning a few things from this thread myself.
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Re: Traditional framing in Uganda

Post by pramsay13 »

Here's my first effort.

This was the best corner :D
Attachments
20180905_222218.jpg
20180905_222218.jpg (3.68 MiB) Viewed 5925 times
kartoffelngeist
Posts: 268
Joined: Thu 14 Apr, 2016 3:07 pm
Location: Aberdeen
Organisation: Rosie's Framers and Crafts
Interests: Framing, mental health, martial arts

Re: Traditional framing in Uganda

Post by kartoffelngeist »

Looking good! It'll be quite the adventure. Prepare to be impressed by the resourcefulness when people don't have access to the tools they need!

Hope you enjoy your time in Uganda. I spent a while in Malawi and absolutely loved the place.

Just started following you on twitter, so looking forward to the updates!
Thanks,

andrew
"The only way of discovering the limits of the possible is to venture a little way past them in to the impossible."
Etsy
Facebook
Twitter

vintage frames
Posts: 1349
Joined: Tue 12 Jun, 2012 6:05 pm
Location: West Wales
Organisation: https://www.dermotmcardle.co.uk/
Interests: Making picture frames
Contact:

Re: Traditional framing in Uganda

Post by vintage frames »

I don't see what's really wrong with the mitres. If the moulding was hand produced, then there is always a higher level of tolerance to the finished appearance of the frame. We can all get a little hung-up on the closed mitre syndrome. Yes, if you're into factory stock moulding, then a good closed mitre helps mitigate the "look" but with hand produced mouldings, it's all about the softer, craft produced appearance of the frame.
And to put mitres into some perspective - I take 2 to 3 weeks to produce a finished picture frame. Within that time I spend just 1/2 hour cutting and assembling the frame.
I bet the guys in Uganda are a really good craftsmen and given the tools available, they'll produce excellent work in the end.
Affordable Gilding Course for Professional Framers-https://www.dermotmcardle.co.uk/
https://www.instagram.com/dermotmcardle/
JFeig
Posts: 1285
Joined: Thu 23 Sep, 2004 8:31 pm
Location: Detroit, Michigan USA
Organisation: minoxy, LLC
Interests: non-fiction knowledge
Contact:

Re: Traditional framing in Uganda

Post by JFeig »

This is a rabbit plane video regarding picture framing.

[youtube] https://www.youtube.com/watch?v=ZJvDH0hpxNk [/youtube]
Jerome Feig CPF®
http://www.minoxy.com
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Traditional framing in Uganda

Post by Steve N »

Slap a bit of filler in the corners and paint over them, as an ex member of this forum was known to say, "that you can't beat hand finishing," (more like bodging in the way he did it) :giggle:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Post Reply