Downpipe - fillet and slip storage
Posted: Thu 20 Jun, 2019 1:46 pm
I was in discussion with a supplier recently and they hadn't heard of the solution I use for storing fillets and slips - square down pipe screwed to the ceiling - so I thought I would share in case of interest to others.
I cut a three large holes with a hole saw equally spaced along the 2.4 m lengths to enable access to put screws in and to let me see what was hiding in the down pipe.
All he best
Nick
I cut a three large holes with a hole saw equally spaced along the 2.4 m lengths to enable access to put screws in and to let me see what was hiding in the down pipe.
All he best
Nick