Paperweights?

Discuss Picture Framing topics.

PLEASE USE THE HELP SECTION
WHEN SEEKING OR OFFERING HELP!
Post Reply
aspectgreg
Posts: 5
Joined: Sun 15 Mar, 2020 7:20 pm
Location: Essex
Organisation: Aspect Framing
Interests: I’m a watercolour artist, moving into framing.

Paperweights?

Post by aspectgreg »

Hi there,

Am wondering what everyone uses for weights? Scratching about and have used jars of jam today, but need something slightly more practical. Any recommendations folks? Loathe to buy decorative glass weights due to the cost.

Thanks for any advice.
Not your average framer
Posts: 11013
Joined: Sat 25 Mar, 2006 8:40 pm
Location: Devon, U.K.
Organisation: The Dartmoor Gallery
Interests: Lost causes, saving and restoring old things, learning something every day
Location: Glorious Devon

Re: Paperweights?

Post by Not your average framer »

Little plastic containers filled with sand mixed with PVA glue work quite well. I've got a large quantity of the plastic container and lits that are used by Chinese take aways for putting sauce into, I use them for mixing paint. Something like that would probably make a good mould for sand mixed with PVA. Best to leave it a few days for it to set, before popping it out of the mould.
Mark Lacey

“Life is short. Art long. Opportunity is fleeting. Experience treacherous. Judgement difficult.”
― Geoffrey Chaucer
aceframer
Posts: 69
Joined: Mon 18 Oct, 2010 12:53 pm
Location: Andover
Organisation: Ace Framing & Art Gallery
Interests: framing, art, scouting

Re: Paperweights?

Post by aceframer »

I use pickle jar weights, they are glass, smooth and much cheaper than paperweights
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: Paperweights?

Post by Justintime »

I've been picking up paperweights from charity shops over the last few years. Around £5 or under usually. That's for keeping new work flat on the table.
For glueing mats together etc, I have some home gym weights in a range of sizes.
Justin George GCF(APF)
Insta: georgetheframer
JonathanB
Posts: 164
Joined: Thu 19 Mar, 2015 8:43 pm
Location: Romsey
Organisation: Dovetail Framing
Interests: Travel, music and gardening

Re: Paperweights?

Post by JonathanB »

I use offcuts of glass. Take eight pieces of 8cm square glass and cover in handy wrap and you have a cheap and easy paperweight. If it gets tatty, just wrap it again. I keep a range of these handy and they are ideal for jobs like float mounting and hinging. Ideal way of using up scraps of glass you'd otherwise throw away.
Jonathan Birch GCF (APF)
User avatar
YPF
Posts: 452
Joined: Mon 07 Sep, 2009 11:25 am
Location: Worcester
Organisation: Your Picture Framer
Interests: Dog agility with my 2 cocker cross spaniels and a bit of woodturning. Recently taken up the ukulele!
Location: Worcester
Contact:

Re: Paperweights?

Post by YPF »

On the workbench I use off cuts of glass with mountboard stuck top and bottom. On the counter I have small white socks filled with rice.
Steve
Chief Coffee Drinker
http://www.yourpictureframer.co.uk
User avatar
GeoSpectrum
Posts: 2151
Joined: Fri 01 Oct, 2010 11:49 am
Location: Lincolnshire
Organisation: Ashcraft Framing
Interests: Family, x-country skiing, wine, art, Jazz
Location: Gainsborough, Lincolnshire
Contact:

Re: Paperweights?

Post by GeoSpectrum »

Handy wrapped glass squares.
Alan Huntley
Ashcraft Framing
Bespoke Easels and Self-assembly tray frames
http://www.ashcraftframing.co.uk
User avatar
pramsay13
Posts: 1374
Joined: Tue 27 Sep, 2011 11:46 am
Location: Stonehouse, Lanarkshire
Organisation: Picture Framer (ML)
Interests: picture framing (no, really!) sport, music
Contact:

Re: Paperweights?

Post by pramsay13 »

I have a few small plastic tupperware tubs on the counter, 2 for screws, 2 for d-rings, and 2 for ferrules, so I just use them if I ever need paperweights.
Richard Photofusion
Posts: 221
Joined: Wed 02 Jun, 2010 10:12 am
Location: Brixton, London
Organisation: Photofusion
Interests: Photography, and carting a young gymnast from class to comp to where ever the next sport is.*

*young, now a teenager...
Location: Brixton
Contact:

Re: Paperweights?

Post by Richard Photofusion »

Handywrapped stacks of 2mm aluminium, mostly 5x4", but sets going all the way up to 16x20". Very useful for taming prints from the 44" printer.

Start with corners and edge centres held down by 5x4 stacks, then if the paper is still curly (and some of the alpha cellulose materials are really meant to be springs), trimmed prints held under larger stacks. rewrap when needed.

On occasions (i.e. to bond subframes), I've resorted to using MacPro computers as weights - 19" square, and 25KG. I keep a small stack of them in the corner for such purposes. Weigh distribution aided by sheets of aluminium, forex and so on.

Must tidy that corner.
Attachments
IMG_3577.JPG
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Paperweights?

Post by Steve N »

I use ceramic coasters to hold down artwork
20200618_125919.jpg
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
User avatar
iantheframer
Posts: 236
Joined: Mon 21 Jan, 2008 2:59 pm
Location: central portugal
Organisation: is not my greatest talent!
Interests: photography

Re: Paperweights?

Post by iantheframer »

Find these in junk shops and flea markets, stick a piece of mountboard on the bottom
iron.jpeg
iron.jpeg (9.31 KiB) Viewed 5596 times
Ian
+Rafe+
Posts: 165
Joined: Wed 26 Apr, 2017 4:33 pm
Location: SE London
Organisation: Photographer/Framer
Interests: Theatre, film, the arts, a bit of this, a bit of that

Re: Paperweights?

Post by +Rafe+ »

As Justin mentioned I have a few glass weights I purchased from charity shops.

I also have about 12 other weights made from old spice jars. Sainsbury’s own brand come in little glass jars. I have filled these with v-nails. I used to have a Minigraff underpinner and used my old supply to fill these up.

Work a treat, perfect size and good weight.

I then have a few dumbbell plates, also bought from charity shops.
User avatar
Rainbow
Posts: 891
Joined: Tue 23 Jun, 2015 8:51 am
Location: See my name, I'm somewhere over it
Organisation: Picture sales and framing
Interests: varied

Re: Paperweights?

Post by Rainbow »

I love all these ideas. I think I'll start saving glass jars so that I can upcycle V-nails. I've got used V-nails sitting in a tub just waiting for a use for them :D

At the moment I'm using ceramic coasters, with these paper coasters underneath just in case the ceramic ones get grubby.
https://www.lakeland.co.uk/9433/200-Soa ... -Coasters-
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: Paperweights?

Post by Justintime »

Some great ideas here! I love the reuse of MacPros :lol:
In case anyone is interested, here is my lovely collection of paperweights.
I've been mistaken for a collector, but I promise I'm not buying any more now!
Attachments
paperweights.jpeg
Justin George GCF(APF)
Insta: georgetheframer
User avatar
Rainbow
Posts: 891
Joined: Tue 23 Jun, 2015 8:51 am
Location: See my name, I'm somewhere over it
Organisation: Picture sales and framing
Interests: varied

Re: Paperweights?

Post by Rainbow »

Rainbow wrote: Thu 18 Jun, 2020 3:29 pm I think I'll start saving glass jars so that I can upcycle V-nails. I've got used V-nails sitting in a tub just waiting for a use for them
:Slap: I didn't mean V-nails, I meant used blades!
Richard Photofusion
Posts: 221
Joined: Wed 02 Jun, 2010 10:12 am
Location: Brixton, London
Organisation: Photofusion
Interests: Photography, and carting a young gymnast from class to comp to where ever the next sport is.*

*young, now a teenager...
Location: Brixton
Contact:

Re: Paperweights?

Post by Richard Photofusion »

Used blades, still using them for weights as well, while trying to work out what to do with them.
A box of old hard drives - incredibly dense, still waiting to be fully decommissioned before disposal. As they can't be used for anything technological, I guess they qualify as paperweights.

Show and tell...
Attachments
Playroom_Weights.jpg
Post Reply