FREE Cassese CS299 for parts or refurb

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
User avatar
Tudor Rose
Posts: 1117
Joined: Wed 10 Mar, 2010 4:07 pm
Location: Dawlish, South Devon
Organisation: The Framing Lot
Interests: Tudor history, swimming, walking and needlework.
Contact:

FREE Cassese CS299 for parts or refurb

Post by Tudor Rose »

Our old workhorse of an underpinner got replaced by the new model a couple of years ago, but we kept hold of it "just in case" (as you do!). We are refurbishing the workshop and now need to send this on its way. It was still working, up to a point and with a bit of encouragement, when we swapped it for the new one. It would suit someone either willing to do the maintenance and refurb on it to get it back to full working condition or as useful spare parts for an existing machine. We used it for about 9 years in a busy workshop and it didn't let us down during that time; it was just wear and tear were beginning to take its toll.

We are located in Dawlish, South Devon. It would need to be collected from us here and we can lend a hand with loading it into a vehicle this end.

Not looking for any money for it, but if you would like to make a small donation to the Royal Marines Charity and Devon Air Ambulance (as we are currently raising money for them by doing the Commando Challenge in October) then that would be gratefully received.
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation


Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Master from May 2019 to May 2022
Dave the frame
Posts: 115
Joined: Thu 27 Mar, 2008 8:59 pm
Location: Barry South Wales
Contact:

Re: FREE Cassese CS299 for parts or refurb

Post by Dave the frame »

Hi Jo

Do you still have the underpinner ? if so I would really like to have it for spares for mine. My phone no is 07790498314 my email is enquiries@dandsframes.co.uk. Looking forward to hgearing from you.

Regards

Dave
User avatar
Tudor Rose
Posts: 1117
Joined: Wed 10 Mar, 2010 4:07 pm
Location: Dawlish, South Devon
Organisation: The Framing Lot
Interests: Tudor history, swimming, walking and needlework.
Contact:

Re: FREE Cassese CS299 for parts or refurb

Post by Tudor Rose »

Email sent :D
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation


Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Master from May 2019 to May 2022
User avatar
Tudor Rose
Posts: 1117
Joined: Wed 10 Mar, 2010 4:07 pm
Location: Dawlish, South Devon
Organisation: The Framing Lot
Interests: Tudor history, swimming, walking and needlework.
Contact:

Re: FREE Cassese CS299 for parts or refurb

Post by Tudor Rose »

Our old underpinner will soon be on its way to a new home, thank you to everyone who showed an interest.
Jo Palmer GCF(APF) Adv
Textile, Mount Design & Function & Conservation


Forum Moderator & Framing Educator
www.pictureframingtraining.com
Guild Certified Examiner & Guild Accredited Trainer
Guild Master from May 2019 to May 2022
Post Reply