Ademco Cold Mount Press

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
Lars
Posts: 5
Joined: Fri 23 Aug, 2013 7:34 am
Location: Palmerston North, New Zealand
Organisation: Van Uffelen Gallery & Framing LTD
Interests: Picture Framing

Ademco Cold Mount Press

Post by Lars »

Hi There,

I am on the look out for a either a Ademco CL25, CL42 or preferably a CL52. Could anyone point me in the right direction to find a near new or good used model?
Lars
Posts: 5
Joined: Fri 23 Aug, 2013 7:34 am
Location: Palmerston North, New Zealand
Organisation: Van Uffelen Gallery & Framing LTD
Interests: Picture Framing

Re: Ademco Cold Mount Press

Post by Lars »

Hi Everyone,

I wanted to re-post the above question to whom may be able to assist with any knowledge on the whereabouts of an Ademco wide format cold press to purchase in good condition. Any leads would be appreciated.

Kind Regards,
Lars
Justintime
Posts: 1868
Joined: Sat 26 Sep, 2015 8:48 am
Location: West Wales
Organisation: George The Framer LLP
Interests: Gardening, design, electronic music, good food and beverages.
Contact:

Re: Ademco Cold Mount Press

Post by Justintime »

If you have a look at the recent post in the adverts section, for "Hard Bed Press", is this the size you are looking for?
Justin George GCF(APF)
Insta: georgetheframer
poliopete
Posts: 798
Joined: Mon 04 Apr, 2016 7:13 am
Location: The Wash
Organisation: Annie Lou Fine Framing
Interests: Caring for my wife, Picture Framing and Natural History

Re: Ademco Cold Mount Press

Post by poliopete »

Hello Lars and welcome to the Framers Forum :D

If you do locate the Hard Bed Press you a looking for, have you considered the shipping costs to New Zealand from the UK?

Good luck with your search.

Peter.
User avatar
Steve N
Posts: 2992
Joined: Sat 21 Jul, 2007 2:32 pm
Location: Somewhere Staple Hill Bristol
Organisation: Frontier Picture Frames ltd
Interests: Walking our retired Greyhound,art, falling asleep on sofa in front of the telly
Location: Now in Bristol
Contact:

Re: Ademco Cold Mount Press

Post by Steve N »

:nerd: This was originally posted 6 years ago :!:
Steve CEO GCF (020)
Believed in Time Travel since 2035

Proud to sell Ready Made Frames
http://www.frontierpictureframes.com
http://www.designerpicturemounts.com/
Lars
Posts: 5
Joined: Fri 23 Aug, 2013 7:34 am
Location: Palmerston North, New Zealand
Organisation: Van Uffelen Gallery & Framing LTD
Interests: Picture Framing

Re: Ademco Cold Mount Press

Post by Lars »

Thanks for the comments thus far.

This machine consist of two rollers with only one single control for height adjustment; meaning no chance of inconsistent or misaligned feed through of work.

There is a bed on my current machine although very small. It is definitely more single height control the roller system I am after. Ademco made a great one, although there might be other brand I am unaware of.
Post Reply