FTAGH- Kity 618 Cast Aluminium Table Saw

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
fusionframer
Posts: 600
Joined: Thu 02 Sep, 2010 8:16 pm
Location: Badminton
Organisation: Fusion Picture Framing
Interests: framing
Location: Badminton

FTAGH- Kity 618 Cast Aluminium Table Saw

Post by fusionframer »

With the topic about table saw, I realised that I have a kity table saw which needs some tlc, but works. I used to use it as it is, but replaced it with a cast iron machine.

The blade is a 250mm freud blade (I use these on alk my machines), and the only problem is with the raise/drop mechanism so the blade is always at full height.

I have seen that it needs a pin or something simple to get this working and then it will work a treat.

It is an induction motor so is quiet, and the fence does not move (a problem with cheaper machines)

If this would be of use to anyone, you can have it for free.
20171010_112618.jpg
20171010_112618.jpg (5.61 MiB) Viewed 4371 times
20171010_112611.jpg
20171010_112611.jpg (5.04 MiB) Viewed 4371 times
www.fusionframing.co.uk

Never trust a dog with orange eyebrows.
User avatar
StevenG
Posts: 1147
Joined: Thu 31 Jan, 2013 8:01 am
Location: Tyrone, N.Ireland
Organisation: Featurepiece Frames
Interests: Movies, always trying to get things better, Wasting money on things I don't need, reading stuff on here, eating sandwiches & being thankful for the small things
Contact:

Re: FTAGH- Kity 618 Cast Aluminium Table Saw

Post by StevenG »

Whilst this would be of no use to me I just thought I would say how decent your offer is :clap: :clap:

Nice play sire :D
Alexis Hemsley
Posts: 167
Joined: Mon 20 Jan, 2014 5:37 pm
Location: South Wales
Organisation: Frame 4 Me
Interests: Private flying, golf, carpentry
Location: Porthcawl
Contact:

Re: FTAGH- Kity 618 Cast Aluminium Table Saw

Post by Alexis Hemsley »

Have sent you a PM
fusionframer
Posts: 600
Joined: Thu 02 Sep, 2010 8:16 pm
Location: Badminton
Organisation: Fusion Picture Framing
Interests: framing
Location: Badminton

Re: FTAGH- Kity 618 Cast Aluminium Table Saw

Post by fusionframer »

Now collected.
www.fusionframing.co.uk

Never trust a dog with orange eyebrows.
Alexis Hemsley
Posts: 167
Joined: Mon 20 Jan, 2014 5:37 pm
Location: South Wales
Organisation: Frame 4 Me
Interests: Private flying, golf, carpentry
Location: Porthcawl
Contact:

Re: FTAGH- Kity 618 Cast Aluminium Table Saw

Post by Alexis Hemsley »

Many thanks to Fusionframer for the saw. cost less then £10 to put right, very happy
Post Reply