Morso bench top foot-operated hydraulic underpinner

Buying/selling equipment
Situations wanted/vacant
Forum rules
All sellers are required to have a forum profile that identifies them clearly. (Such as - name, surname, location, business name et cetera)
Post Reply
janeyflute
Posts: 8
Joined: Tue 09 Feb, 2016 8:48 pm
Location: Buckinghamshire
Organisation: FW Studios
Interests: framing

Morso bench top foot-operated hydraulic underpinner

Post by janeyflute »

Lovely Morso underpinner, great for a small workshop or studio.

Collection from WD3 6EP or HP5 2HT, or can post for appropriate cost.

Looking for around £600.

Some technical information:


Morso Model UP-M frame assembler is a manual bench model which is operated by a single pressure on a hydraulic foot pedal.
The Morso Model UP-M is perfect for the small shop, which does not have a lot of space.
The Morso Model UP-M can be placed almost everywhere, and does not require any kind of compressor or electricity.

Standard equipment for the machine is:

two stops for wedge position,
single pressure pad for plain mouldings,
two double pressure pads for mouldings with different profiles,
adjustable fences - 90, 60 and 30 degrees for rectangular, hexagonal and octagonal frames,
hydraulic foot pedal.
WP_20180220_09_44_00_Pro_LI.jpg
WP_20180220_09_44_00_Pro_LI.jpg (2.58 MiB) Viewed 1770 times
WP_20180220_09_43_49_Pro_LI.jpg
WP_20180220_09_43_49_Pro_LI.jpg (2.47 MiB) Viewed 1770 times
WP_20180220_09_43_40_Pro_LI.jpg
WP_20180220_09_43_40_Pro_LI.jpg (2.8 MiB) Viewed 1770 times
WP_20180220_09_43_28_Pro_LI.jpg
WP_20180220_09_43_28_Pro_LI.jpg (2.42 MiB) Viewed 1770 times
WP_20180220_09_43_21_Pro_LI.jpg
WP_20180220_09_43_21_Pro_LI.jpg (3.08 MiB) Viewed 1770 times
Post Reply